What parts should be replaced in a 4hp22/24?

The percentage of hard parts replacement and seals (separately) is quite low only in the overhaul kit (repair kit). It is common to replace worn-out pump housing bushing (covers – 17 mm), and less frequently bushings (13 mm) with the pump gasket and pump seal in the 4HP22/24 unit suffering from oil starvation.

What is the meaning of 4hp22-24 transmission?

The 4HP22 – 24 unit was used by all European automakers of high-priced and reliable cars: Audi, BMW, Jaguar etc. In terms of design, this transmission is similar to famous A4LD from Ford and A40-series from Toyota. The 4HP24 unit found application in 4WD models.

Where to buy a 4hp22eh pan gasket and filter?

Photo below, the 4HP22EH gasket is in the lower left of the shot: The Pan Gasket and Filter can be had from pretty much anywhere, all the local chain stores here in Australia such as Repco, Autobarn, Supercheap & Bursons carry them. The cheapest I found was a wholesaler by the name of Imparts.

What is the capacity of the ZF 4HP22 engine?

In this case it is needed to rebuild ZF 4HP22 problems. Capacity: oil change 5l., dry fill: 9l. What do you need for repair?

Is there a Repair Manual for ZF 4HP22?

This repair manual provides instructions, installation instructions, maintenance manuals and other service information for transmission ZF 4HP22. This manual contains detailed drawings and diagrams that help you to get a detailed description of all systems of transmission ZF. This manual comes in PDF.

Why does my ZF 4HP22 have a dirty valve body?

The problem of a dirty valve body is usually explained by worn-out locking clutch of the torque converter. If there are some delays with gears shifting, kicks or slippage in ZF 4HP22 with mileages above 200 thousand kilometers, then it signals that springs and solenoids cannot handle the dirt from frictions falling on valves.