What does Avaya media server do?

Avaya Aura® Media Server (MS) is a software-based media application platform. Avaya Aura® MS performs all multimedia processing using software rather than using dedicated hardware-based DSP resources.

What is AAMS Avaya?

AAMS: Avaya Aura Media Server [AAMS]: 19501 Alarm – Event ID avmsAlarm19501Raised. Alarm Description – This AMS alarm condition indicates the following: High Availability Peer Unavailable. High Availability Peer Unavailable.

How do you upload announcements to Avaya media server?

You must place the announcement file onto Media Server. You can do this by recording the announcement from a station using the announcement recording feature-access-code or more generally through the System Manager VAL manager capabilities.

What is Avaya Session Manager?

Session Manager is the core of Avaya’s Session Initiated Protocol (SIP) based “cloud communications” architecture. Session Manager supports the half-call model and application sequencing, enabling custom features to be applied to individual users’ calls.

How do I create an announcement in Avaya?

Announcements/Audio Sources

  1. To change the value of the fields on the Announcements/Audio Sources screen, use the following command:
  2. add announcement n , where n is the extension number.
  3. In Communication Manager 7.1. 3, you can configure up to 9000 announcements for a single Avaya Aura Media Server instance.

How do I enable Filexfer on Avaya?

Solution

  1. First, login into your Avaya Site Administration (ASA) and determine the announcement board you would like to retrieve the announcements from.
  2. In ASA, issue the following command: enable filexfer (in release 5.2, in prior releases use the command: enable filesystem) and press Enter.

How do you upload announcements on Avaya g450?

Login to CM and at the command prompt type: list media (this will list all media resources on the system so you can get the corresponding IP address you need for each Gateway)- F1 to cancel command. Use an FTP application to connect to the IP Address of the Gateway and load the announcement files to the Gateway.