What is encaustic floor tile?

July 05, 2019. The term “encaustic tile” refers to a specific type of tile manufactured with cement, then compressed. Porcelain tile is made from a fine-grade clay and fired in a kiln. However, since porcelain tile can be made to resemble its cement cousin, the lookalikes are often called encaustic too.

Is encaustic tile a fad?

Popular in the very ornate Victorian and (more austere but still ornate by modern standards) Edwardian eras, and dating all the way back to Medieval times, graphic encaustic (or cement) tiles are enjoying a revival. Okay, it’s suddenly a HUGE trend.

Do encaustic tiles stain?

‘Encaustic tiles that have become stained or dirty can generally be cleaned with fresh water, detergents or proprietary tile cleaners – but never soak them,’ says Hunt. ‘Where water is used to clean encaustic tiles, control its spread; a wet towel left on the floor overnight can be effective.

Are encaustic tiles hard to lay?

Installing cement tiles is not hard. If you follow our instructions as to how to install cement tiles you will find the job quite simple and very satisfying. Encaustic cement tiles can transform any space in your home. In the bathroom, you can create a hardwearing that will look great for many years.

Do encaustic tiles need sealing?

All encaustic tiles are porous, therefore it is important to seal the tiles correctly to reduce the natural absorption and maintain the desired appearance. If the recommended care system is used the surface will be easier to maintain.

Do you have to seal encaustic tiles?

Are encaustic tiles hard to clean?

Like Ceramic, Encaustic tiles are generally very easy to clean and generally need little maintenance.

Are encaustic tiles cement?

Encaustic tile is traditionally made from clay, but today, most modern versions of the tile are made using cement and are often referred to simply as cement tile.

How often do you need to seal encaustic tiles?

The sealer can be applied by directly pouring small amounts onto the tiles. Use a clean cloth to spread and work it into the surface. Allow to dry for 8 hours. This should be done once a year.