What smart thermostats work with line voltage?

Best Line Voltage Smart Thermostats

  • Mysa Smart Thermostat. Mysa Smart Thermostat for Electric Baseboard Heaters.
  • Sinopé
  • Stelpro Maestro ASMT402.
  • Stelpro Ki.
  • King K902-B Hoot.
  • Minimize electricity to save big.
  • Zoning offers the potential for even bigger savings.
  • Remote access to all your thermostats in the palm of your hand.

What smart thermostat works with 120V?

KING K902-W Hoot WiFi Line Voltage Smart Programmable Thermostat, 120/208/240V, Double Pole, White.

Does Nest make a line voltage thermostat?

Unfortunately, there is no ecobee or Nest line voltage thermostat. So, if you’d like the control of a smart electric heating system, it’s best to get a smart wifi thermostat for electric baseboard heat instead.

How do I know if my thermostat has line voltage?

When looking at your thermostat’s wiring, also look at how thick the wires are in your gang box. If there are large, thick wires, your thermostat is likely line voltage. Thin multi-coloured wiring indicates low voltage.

What is the difference between line voltage and low voltage thermostat?

Line voltage thermostats deliver electricity directly to heaters. So, they handle more power than low voltage thermostats that control central HVAC systems like a gas furnace. They work by measuring room temperature and controlling power delivery to maintain a setpoint (the temperature you set your thermostat).

What is the difference between a line voltage thermostat and a 24 volt thermostat?

How do you wire a line voltage thermostat?

Instructions

  1. Attach a Wire Nut to Ground and White Wires.
  2. Wire-Nut One Hot Wire to Bypass the Thermostat.
  3. Attach the Line and Load Black Wire to Thermostat.
  4. Push the Green, White, and Red Wires Into the Box.
  5. Line Up the Screws on the Box.
  6. Screw the Thermostat Into the Box.
  7. Replace the Thermostat Faceplate.

How do I know if my thermostat is 120V?

Turn off the power to your thermostat before checking the wiring as high voltages can be dangerous and even fatal. You can also look into the gang box of your existing thermostat. If you have black and white wires you likely have 120V. If you have black and red wires you likely have 240V.

What does line voltage mean on thermostat?

Line voltage thermostats are used to regulate heating/cooling systems that run on direct electricity (line voltage – 120 volts or 240 volts). A classic example is baseboard heaters which operate on line voltage. We’ve reviewed baseboard heater thermostat models in our previously published guide.

What is the difference between low voltage and line voltage?

Low voltage lighting systems uses 12 or 24 volts to power its fixtures. As line voltage systems come in at 120 volts, low voltage systems require a transformer so as not to immediately burn out the bulbs. The transformer itself needs to be installed relatively close to the light fixture in order to function properly.

What is the most important element of checking line voltage thermostats?

The most important element of checking line voltage thermostats is to be sure the contacts are closed in the correct temperature range. Once it has been determined that the thermostat should be opened or closed, it can be checked with an ohmmeter.

Why are line voltage thermostats less accurate than low voltage thermostats?

Why is low voltage thermostat normally more accurate than a high voltage thermostat? Because unanticipated thermostat cycles shows system overshoot causing larger temp swing low voltage is acts faster.

Can I use a 24V thermostat on a millivolt system?

A line voltage thermostat needs to be connected to a power supply of fewer than 30 volts, while a millivolt thermostat needs only 0.75 volts and a line voltage thermostat needs 120 to 240 volts.

Does ecobee work with line voltage?

1) Nest/Ecobee Are Not Compatible With Baseboard Heaters These systems operate on a lower voltage (24V) and do not use electricity directly. Whereas electric baseboard heaters operate on a higher voltage (120V or 240V), so a thermostat has to control more power.

Can you convert a line voltage to low voltage thermostat?

It is indeed possible to convert a line voltage thermostat-controlled heater to use a low voltage room thermostat. The basic approach is to buy a switching relay that is operated by the low-voltage thermostat and that in turn turns on the 120VAC or 240VAC heaters.

Is 120V line voltage?

Line voltage lighting systems typically use 120v or 277v to supply power to lighting fixtures. Line voltage lighting systems do not require transformers to power lighting fixtures in many different applications.

Is 24V considered low voltage?

Low voltage is defined as 50 volts (V) or less. Common low voltages are 12V, 24V, and 48V. Low voltage is normally used for doorbells, garage door opener controls, heating and cooling thermostats, alarm system sensors and controls, outdoor ground lighting, household and automobile batteries.

Which of the following are the two main types of thermostats?

In terms of operation, there are two types of thermostats: line-voltage and low-voltage.

Will a line voltage thermostat work with low voltage?

A low voltage thermostat will not work with line voltage wiring.

Why is low voltage thermostat normally more accurate then high voltage thermostat?

https://www.youtube.com/watch?v=a7F7vCNveOU