Which razors use HQ9 heads?

Description. Philips Norelco HQ9/52 Replacement Heads fit the following shaver models: AT900 series, 8100 series, 8200 series, 9100 series.

Are shaver heads Universal?

Yes. All safety razor blades are universal. Double edged or DE blades will fit into any butterfly razor or doubled-edged razor.

When should I replace my Philips shaver head?

Reset your shaver to new To get back to 100% performance, replace your shaving heads every 2 years.

How long do Philips shaver heads last?

We recommend replacing the blades every four months. However, this can vary depending on usage and hair type. If you have very thick hair or if you use the OneBlade very frequently, the blades may need to be replaced sooner than four months. If you are a light user, then the blades can last much longer.

Are HQ8 and SH50 interchangeable?

Yes, you can use the Philips Norelco SH50 shaving blades for the Philips Norelco PT730 shaver. A: Hello! Yes, Philips Norelco HQ8 Shaving Heads has been replaced by Philips Norelco SH50/52 Replacement Head.

Is HQ8 the same as SH50?

HQ8 has been replaced by SH50 Dual-blade system of your Philips shaver: first blade lifts, second blade cuts for a comfortable close shave.

Do all razor blades fit?

Q: Can any Razor Blade fit in Any Razor? A: There’s no question about it: razor technology has changed hugely over time. Double edged safety razor blades ARE interchangeable, and any brand of razor will hold any brand of blade.

How do I change the head on my Philips shaver?

Switch off your shaver and follow the steps below.

  1. Pull the shaving head holder off the body of the shaving unit.
  2. Twist the retaining rings inside your shaving head holder and pull them out one by one.
  3. Remove the shaving heads from the shaving head holder.
  4. Each shaving head consists of a cutter and a guard.

How do I know what Philips shaver I have?

You can find the model number on the backside of your Philips shaver. For the serial number, check the backside, under the pop-up trimmer or in the hair chamber. The serial number consists of 9, 6 or 5 digits.

Do you need to replace electric razor heads?

According to the American Academy of Dermatologists, you should change your razor blades or throw away disposable razors after every five to seven shaves, if not sooner. High-quality razor blades should last five to seven shaves if you take care of them properly and keep them clean.

What is the difference between SH90 62 and SH90 72?

The SH90/72 has a different retaining ring than the SH90/62. I like it better as there are less parts to keep stored. It is light blue in color as compared to orange in the SH90/62. Additionally, one does not need the installation tool to remove or install as it can be easily done with one’s fingers.

Where are Norelco blades made?

Norelco originally was manufactured in the Netherlands. I also saw that in quality stores that sell these also say made in the Netherlands, but at a higher price. I found the heads to give a clean And comfortable shave.

Does Norelco SH30 replace HQ8?

No, the Philips Norelco Shaving Heads SH30/52 do not work with the Philips Norelco AT810/81 shaver. Instead, you may use the Philips Norelco Shaving blades SH50. A: Hello! No, the Philips Norelco SH50 Shaving Heads is the suitable replacement shaving heads for the HQ8.

How often should you replace electric shaver heads?

Should a shaver apply the same time frame to replace them? As a rule, electric shaver foils should be replaced every 12 to 18 months depending on the brand. Like electric shaver blades, they become dull over time. Shaver foils might become duller faster depending on use frequency and thickness, or coarseness, of hair.

Can you use toothpaste to sharpen electric razor blades?

Razor blades don’t actually get dull. Toothpaste contains a little grit to help clean teeth. When we apply toothpaste to the razor instead of our teeth, that grit hones the razor’s blades and removes the microscopic “metal lips” that form at the edges of the holes in the screens from the blades rubbing over them.

Can you reuse razor blades?

Safety razors are designed to be a lasting tool that can be reused for decades. However, blades naturally lose their sharpness with time and use, which makes them less effective at providing a clean and close shave. This means that while the razor might last, the blade does not.

How often should you change razor blades?

Ideally, you want to change your razor blade after 5-10 shaves. Gillette actually recommends 5-7 shaves, but this is just a general rule and it actually comes down more to the thickness and density of your facial hair.