How do I adjust my EZ GO carburetor?

2 Cycle engine: The adjustment screw is on the side of the carburetor and is parallel to the ground. You can identify it by the lock nut at the base of the screw. Loosen this and turn the screw all the way into a soft seat, then back it out one and a half (1-1/2) turns.

How can I make my EZ GO gas faster?

One way to increase the speed of EZ Go golf carts is to incorporate an octane booster when you fill the tank. The cart will have more pick-up, and it could gain as much as 5 mph. A different approach is to take out the throttle linkage governor on the carburetor.

How do I know what model EZ GO I have?

Newer EZ-GO carts have the words “TXT”, “Freedom TXT”, “RXV” or “Freedom RXV” listed on the side of the cart, located vertically beneath the armrests. Once you have the serial number, then enter your serial number into the top left search box on the EZGO website to verify the make and model of your cart!

Why does my golf cart only run with the choke on?

Dwight Coleman there are usually only a few possibilities if it only runs with the choke. One cause could be an air leak on the carb, head gasket, crankshaft seal. The other could be a clogged low speed and idle circuit.

How fast can an ezgo golf cart go?

9 Popular Golf Carts And Their Top Speed

Golf Cart Model Top Speed In Miles Per Hour
EZ Go Express L6 16.5 mph
EZ Go RXV 15 mph
EZ Go Shuttle 8 EFI 16.5 mph
Cushman Hauler 800 14.5 mph

What engine does my EZGO have?

For all models of the E-Z-Go, the engine is air cooled and produces 9 horsepower. The engine is a twin-cylinder unit, displacing 18 cubic inches.

How do you clean the carburetor on a gas golf cart?

How do I Clean a Golf Cart Gas Carburetor?

  1. Step 1 – Gather Up the Necessary Items.
  2. Step 2 – Prepare Before Cleaning.
  3. Step 3 – Remove the Air Cleaner.
  4. Step 4 – Clean the Float Bowl.
  5. Step 5 – Clean the Carburetor Body.
  6. Step 6 – Rebuild the Carburetor.
  7. Step 7 – Put Everything Back Together.

How do you take apart a carburetor to clean it?

Directions for Cleaning a Carburetor:

  1. Dilute cleaner. In a large container, mix 1 part Simple Green Pro HD Heavy-Duty Cleaner to 3 parts water.
  2. Clear air filter.
  3. Remove the carburetor.
  4. Remove carburetor float.
  5. Remove other removable components.
  6. Soak and scrub components.
  7. Rinse and dry.
  8. Reassemble and replace.