What does an Iron Curtain do?

The Iron Curtain Filter System from Guthrie & Frey solves a multitude of water problems by removing iron, sulfur and manganese from your water. The Iron Curtain dissolves these minerals and then filters them away, leaving clean, fresh smelling, good tasting water. No more iron stains, musty taste or bad odors.

Do iron curtains need maintenance?

There are Iron Curtain applications that require service every 2-4 years. These applications are not the norm, but we do see that level of frequency in some cases. We recommend having your Iron Curtain System serviced every 4-6 years.

How often does an Iron Curtain regenerate?

every three days
Iron Applications 0.3 – 3.0 ppm Iron Standard IC System, sized for application service flow rate, set to regenerate every three days.

How long does a whole house iron filter last?

With proper maintenance, you can expect your iron and hydrogen sulfide system to last 10-15 years, depending on your water quality. Replace the media every five years.

Do I need a water softener if I have a Iron Curtain?

Nothing is worse than ruining your clothes in rusty water except maybe taking a shower in water that smells like rotten eggs. The Iron Curtain® eliminates both problems. This system is not a water softener, however. You will still need a quality water softener to have soft, iron and odor free water.

Why is it called the Iron Curtain?

Churchill meant that the Soviet Union had separated the eastern European countries from the west so that no one knew what was going on behind the “curtain.” He used the word “iron” to signify that it was impenetrable.

How often should an iron filter regenerate?

The insoluble flakes of iron that result are then caught by the filter bed. The iron-free water then flows to your faucets. This iron filter replenishes itself every three days in a process that washes the stored iron out of the filter bed and down the drain while refilling the compressed air bubble.

How often do you change an iron filter?

every three months
If your home pulls water from a private well, it may have excess sediment or iron in it. That means it’s probably best to change your filter every three months instead of six. (Simply because it has to clean out more contaminants.)

How do I know if my water softener is regenerating?

The only way to find out if your water softener is regenerating normally is to check the softness of your water. You’ll notice a difference in the water while taking a shower. Or you’ll see limestone deposits in your bathroom walls or taps, and the appliances using water.

Does my water softener regenerate every night?

Time-initiated regeneration is controlled by the clock on the control valve. This is typically set to have the system regenerate after a certain number of days and at a time of day with low water usage, usually in the middle of the night. This process might occur once a week, as an example.

Is an iron filter worth it?

If you own a water softener but your water contains high levels of inorganic iron, an iron filter is a valuable supplement. Water that is high in iron often has elevated levels of manganese, hydrogen sulfide, and arsenic.

Do iron filters need maintenance?

Newer iron filter systems regenerate much like a water softener but because of new media like “Zeoprep”, there is no longer the need for monthly maintenance and the need to clean the filter with chemicals.

Will a whole house filter remove iron?

Whole-house systems can reduce the amount of iron found in water throughout your home, removing buildup, protecting water-using appliances and reducing staining in your sinks, tubs and laundry.

Who started the Iron Curtain?

Churchill’s famed “Iron Curtain” speech ushered in the Cold War and made the term a household phrase.

What was the purpose of the Iron Curtain speech?

Iron Curtain speech, speech delivered by former British prime minister Winston Churchill in Fulton, Missouri, on March 5, 1946, in which he stressed the necessity for the United States and Britain to act as the guardians of peace and stability against the menace of Soviet communism, which had lowered an “iron curtain” …

What happens if you run water while water softener is regenerating?

It is not recommended to use water during a water softener regeneration, as hard water will fill the water heater, which could lead to buildup in the equipment.

How often should I backwash my iron filter?

once or twice a week
Iron filters take this clear iron and transform it to rust or ferric iron in the process known as oxidation in an aerobic environment. These trapped particles are periodically and automatically backwashed out with the flush or backwash of the filter, usually once or twice a week.

How often should my iron filter backwash?

How many times a week should a water softener regenerate?

Typically, the regeneration should occur after every 12 to 14 days or it should occur after a predetermined gallons of water that you use. You can set the number of gallons used before it regenerates through the water softener’s valve.

How do you know if your water softener is working properly?

How to tell if your water softener is working

  1. Check if your “softened” water is still easy to lather.
  2. High-quality laundry work.
  3. Clean pipes, faucets, toilet, tiles, and sinks.
  4. You still experience the unique taste of soft water.
  5. Leaks.
  6. No regeneration cycles.
  7. Low pressure.
  8. Resin beads problems.