How do I install HP OfficeJet 6500?

How do I install HP OfficeJet 6500?

HP Officejet 6500 All-in-One Printer Series (E709) – Setting up the All-in-One (Hardware)

1. Unpack the All-in-One.
2. Attach the control panel faceplate.
3. Install the two-sided printing accessory (duplexer)
4. Connect the power cord.
5. Load plain white paper.
6. Turn the All-in-One on.
7. Set the control panel language.
8. Install the printhead.

How do I get my HP OfficeJet 6500 to scan?

Step 1: Go to Control Panel –> Device and Printers and double-click on the HP printer icon. You should find Scanner Actions there. Under that, click on Activate Scan to Computer. Step 2: Well, that’s about it!

How do I restore my HP OfficeJet 6500 to factory settings?

To restore the Officejet 6500A to factory defaults just follow the steps below:

1. Select the Setup option on the front panel of the printer.
2. Navigate to the Tools option.
3. Under Tools, navigate to Restore Factory Defaults and select it.

How do I install HP Officejet 6500 Wireless without CD?

You can still install your HP Officejet 6500a printer without a disc.

1. HP Officejet 6500a Printer.
2. Find HP Support Website.
3. Click on Link.
4. Accept Cookies and Close Banners.
5. Locate Available Downloads.
6. Select Software to Download.
7. Download Full Feature Software.
8. Locate your Download.

How do I connect my HP Officejet 6500a to my computer?

Connect the printer to the wireless network

1. On the product control panel, touch the Right Arrow ( ), and then touch Network.
2. Touch Wireless, touch Wireless Setup Wizard and then touch OK.
3. Touch the name of your network.
4. When you finish entering the new network name, touch Done, and then touch OK.

Is the HP 6500 printer wireless?

Print, fax, scan and copy, plus forget about messy printer cables with the HP Officejet 6500 Wireless All-in-One. Easily share your printer using built-in wireless[1] and wired networking, print two-sided documents and enjoy convenient scan and fax features.

Why is my HP 6500 not printing?

If the vent on the top of the cartridge is clogged or obstructed, the cartridge might not work properly. Follow these steps to make sure that the cartridges are properly vented and seated correctly. If the printer is not already on, press the Power button to turn it on. Open the ink cartridge access door.

How do I reset my HP Officejet 7500a printer?

Step 4: Reset the printer

1. With the printer turned on, disconnect the power cord from the printer.
2. Unplug the power cord from the power source.
3. Wait 60 seconds.
4. Reconnect the power cord to a wall outlet and to the printer. note: HP recommends plugging the printer directly into a wall outlet.

How do I connect my HP OfficeJet 6500A plus to my computer?

When was HP OfficeJet 6500A made?

October 23, 2010
Product information

Is the HP Officejet 6500 Wireless?

Why is my HP printer not printing black?

To resolve this issue, use only genuine HP cartridges. Additionally, you can remove the black cartridge to print only with the tri-color cartridge, replace any empty or defective cartridges, or clean the printhead.

https://www.youtube.com/watch?v=j2SjV2mSn90