What is an A code Mustang?

A code – This was the upgrade from a basic V-8. The 255-horsepower engine required premium fuel due to the higher compression. C code – The C engine was the base V-8 Windsor, 200-hp engine for 1965 to 1968. It was the V-8 engine but without the expensive, high-performance upgrades.

What is an A code 289?

The code refers to the fifth character of the car’s VIN (vehicle identification number), and denotes the engine the car was fitted with when it left the factory. The most common are C and A, both of which refer to the 289 cu in (4.7-litre) V8 engine with either a two- or four-barrel carburettor.

Are K-code Mustangs rare?

As such, these are highly sought-after Ford Mustang models and many collectors are on the hunt for them. Unfortunately, only a limited number of these engines were produced between 1963 to 1967, and there were even fewer K-code Mustangs (only about 13,214 were made).

What is R code Mustang?

The R Code’s name signifies the Ram Air induction. Seeing resto-mod examples that are not original Mach 1s but have been converted by Ford enthusiasts to have the Mach 1 design package is common. However, this Mustang is a true original.

How can I tell if I have a 289?

Registered. If you remove the Valve Covers the Heads will be Stamped 289 or 302 inside as well as a Date Code in this format: [7L22] or [8A2] for example. The Casting Numbers for the Cylinder Heads are on bottom and only visible if the Heads are removed, typically.

Where is VIN number on 1967 Mustang?

1967 Ford Mustang VIN Decoder The VIN number is found under the hood on top of the driver’s side fender apron. Under the hood.

How much is AK code Mustang worth?

According to Hagerty’s latest Price Guide, the 1966 Mustang K-Code Coupe is valued at $18,500 for a #4 Driver car, up to $43,500 for a #2 Excellent car, and $59k for a #1 Concours example.

What is special about K-code Mustang?

The “K” in K-code Mustangs refers to the engine: a durable, lightweight “Hi-Po” 289-cu.in. V-8, featuring just enough special equipment to help it make an official rating of 271 hp. Until 1967, it was the top engine option available to Mustang.

What is a double K code Mustang?

The K-Code Mustang was a special-edition Mustang made between 1965 and 1967 that came from the factory with a special 289 high-performance cubic-inch engine beneath its hood. In its day, it was quite a beast on the road.

How do I identify a 289 Ford Motor?

Factory-installed 289 High Performance engines had the vehicle serial number stamped into the righthand side of the block near the battery’s negative-cable attachment point.

How can you tell a 289 block?

How many digits is a 1967 VIN?

Between 1968 and 1980, all manufacturers issued VINs for their vehicles, but there was no uniformity. Some manufacturers issued 13-digit VINs, while others issued 11-digit or even 9-digit VIN’s. Between 1955 and 1967, there was no such term as a “VIN”; the term was “serial number” and there was even less uniformity.

How fast was a K code Mustang?

Boasting the V8 and four-speed manual, the Mustang Road & Track recorded a 0-60 mph (0-96 km/h) time of 8.9 seconds, with the standing quarter mile in 17 seconds at 85 mph. Starting in June 1964, the new 271 hp (202 kW) “K-code” High Performance engine became available.