How much horsepower does a 363 stroker make?

477 hp
477 hp at 6,300 and 450 lb-ft at 4,200….Want more power from an 8.2-deck Small-Block? The 363 is the answer.

Engine Specs
DESCRIPTION SPECS
Compression ratio 9.26:1

How much does a Dart SHP block weight?

I just bought a Dart SHP block and it weighs 175 lbs. I was wondering how much more the SHP block weighs than the stock 400 block. I have a stock 400 block but decided to go with the new SHP Dart block for my 406. It is a really well built piece.

What is a Dart SHP block?

Designed for high performance and medium duty applications, the SHP (Special High Performance) block is the ideal starting point for hot rodders, drag racers, circle track competitors, off-roaders, and high performance marine enthusiasts.

What is a 302 Dart block?

The Ford 302 Dart SHP block is tailored to the most popular performance and racing applications, with an 8.200′ (302)or an9. 500′ (351) deck height and a choice of 4.00′ or 4.125′ siamesed cylinder bores which can safely be bored to 4.185.

How much can you bore a Dart Little M block?

4.185 inches
You can get a Dart Little M Sportsman block in either 4.00- (350) or 4.125-inch (400) bore sizes. However, you can bore the Dart blocks out to a maximum 4.185 inches.

How much HP can a dart LS block handle?

Typical grey cast iron tests between 192 BHN. By using a superior grade material and employing a different heat treat technique, Dart offers the LS Next SHP at 220 BHN. This harder cast iron also increases the block’s tensile strength from 30,000 to 38,000 psi.

Why does dart use studs on their iron blocks?

“The studs create more consistent clamping on the main caps, which in turn reduces cap walk.” In pursuit of an ultimately capable iron block, Dart has selected a high-strength iron alloy, which comes in at 220 Brinell hardness, which is quite stout for iron.

What are Dart Iron Eagle small block Ford engine blocks?

The Dart Iron Eagle Small Block Ford Engine Blocks put Ford racers in front with these cast from superior iron alloy engine blocks.

What is the hardness of a Dart engine block?

In pursuit of an ultimately capable iron block, Dart has selected a high-strength iron alloy, which comes in at 220 Brinell hardness, which is quite stout for iron. It also comes with the option of screw-in freeze plugs, and the block can be machined without the distributor bore, for front-drive distributors and coil-on-plug applications.

Is the Dart Iron Eagle the right block for your pushrod?

For a long time – ever since its introduction, really – the Dart Iron Eagle engine block has been the go-to iron block of choice for high-power pushrod applications. Between the additional features, additional strength, and wide variety of options, it ticked almost every box on the wishlist of high-end engine-builders across the country.

https://www.youtube.com/watch?v=6RY0Pjqwqas