What is finger jointed pine baseboard?

Finger jointed pine is a solid pine timber where the board is created using small, individual pieces joined together with glue and small interlocking ‘fingers’ to create a neat zig zag effect at the join site. All knots are eliminated in this process.

Can you use pine boards for baseboards?

Hemlock, oak, pine, poplar, and maple are popular solid wood baseboards for staining. If you are installing baseboards in great numbers and cost is an issue, then choose MDF baseboards for the cost advantage that they offer.

What is a finger joint trim board?

Product Group: Boards Primed Finger-Joint, also known as a comb joint, is a woodworking joint made by cutting a set of complementary, interlocking profiles in two pieces of wood, which are then glued. The cross-section of the joint resembles the interlocking of fingers between two hands, hence the name “finger joint”.

How strong is finger jointed wood?

Joints with slopes of 1 in 10 or 1 in 12 were found to attain tensile strengths equal to 85 to 90 percent of the strength of clear wood. At a slope of 1 in 20, the average was approximate- ly 95 percent of the strength of clear wood in tension (50, 92).

Is pine Good for interior trim?

Softwoods such as fir or pine are regularly used for paint grade trim and moldings since it is generally less expensive and easy to work with.

Is pine good for trim?

Pine Is Inexpensive Pine is one of the least expensive woods and one of the easiest to work with. It is the standard lumber for framing houses and is usually used for exterior trim and molding, on roof facings and around exterior doors and windows.

Are finger joints strong?

The sides of each profile increases the surface area for gluing, resulting in a strong bond, stronger than a butt joint but not very visually appealing. Finger joints are regularly confused with box joints, which are used for corners of boxes or box-like constructions.

What are the pros and cons of finger joints?

Finger Joint Pros & Cons

  • Makes a straighter joint.
  • Less wood gets wasted during manufacturing.
  • Cost Effective.
  • Durable for a vertical load.
  • Adhesives can be applied to create a stronger joint than mortise and tenon.

What is a finger jointed pine board?

Finger jointed pine is a solid pine timber where the board is created using small, individual pieces joined together with glue and small interlocking ‘fingers’ to create a neat zig zag effect at the join site. All knots are eliminated in this process. What are the benefits?

Can finger jointed pine mouldings save you money?

Though you may not have an immediate saving on your initial purchase of finger jointed pine mouldings, their ease of installation, longevity and durability will reduce your risk of early replacement and save you money in the long run. Please correct the errors and try again.

Can I use finger jointed pine skirting boards in wet areas?

In wet areas, or areas with hard floors (which would need to be mopped or steamed to clean), we only recommend the use of finger jointed pine skirting boards.

Can you use finger jointed pine for MDF?

Intrim recommends finger jointed pine for timber mouldings Without a doubt, finger-jointed pine is a superior material for timber moulding profiles. However, for budget reasons, if you still choose MDF, Intrim recommends having it factory pre-primed to seal the entire surface and give it the best protection possible from moisture absorption.