Does a spa need a blower?

If the equipment is below water, the only issue is with the spa air pipe which will fill with water when the spa is off. A blower is then required to help push the water out of the pipe so that air can enter the venturis.

What is a pool spa blower?

A hot tub blower is a unit that uses a fan to create air flow and then channels that air through the jets in a hot tub or spa. It is sometimes referred to as an air pump or a bubbler because it creates bubbling in the water (different from a hot tub jet).

How do you test a hot tub blower?

Turn on the Electricity and Test Plug everything back in, and turn the power to your hot tub back on. Test your new spa blower by turning on your hot tub. Allow it to run for a few minutes in order to make sure everything is running smoothly.

Do I need a circulation pump on my hot tub?

The Circ Pump ensures that your water is moving and clean. While you can still purchase a hot tub without a Circ Pump, our hot tub experts at The Spa and Sauna Company recommend that you purchase a hot tub with some sort of filtration system. Hot Tubs without a Circ Pump often use a two-speed pump.

How do you test a spa blower?

Why is my hot tub blower not working?

Check the wire powering the air switch and check the switch for continuity. If no power, check the wire leading to the switch for continuity and replace as needed. If you have power but do not get proper switching action, replace the switch. If none of these things fix the problem, the blower may need to be replaced.

How do I know if my circulation pump is working in my hot tub?

Check that your power is on, the breaker or GFCI test button are not tripped, all valves are in the open position. Follow the circ pump plumbing, and look for any kinks in the hose. Pull out the cartridge filter to see if flow improves and the circulation pump is doing better.