How do I connect my Hirschmann switch?

Four Easy Steps to Configure an unmanaged Switch:

  1. Use the Switch Programming Tool to configure all switch and port parameters.
  2. Save the configuration file to a USB drive.
  3. Connect the USB drive to the switch.
  4. Power-cycle the switch to transfer and apply the new configuration.

How do I reset my Hirschmann switch?

To reset the switch to factory default settings, select “Delete – current configu- ration and local” and then click on the “Delete configuration” button (the IP address will be reset as well). This page provides basic information about the switch.

What is Hirschmann switch?

Hirschmann Managed Switches – Technology and Market Leader in Industrial Networking. Broad portfolio of ruggedized managed Ethernet switches that are engineered for reliable performance in harsh industrial environments.

How do I use HiDiscovery?

The easiest way to accomplish this is using the HiDiscovery application.

  1. Install the HiDiscovery application onto your laptop.
  2. Power up the switch.
  3. Connect an Ethernet cable between your laptop and the switch.
  4. Open the HiDiscovery application on your laptop and you will see the following.

What is HiDiscovery?

HiDiscovery – A simple, free of charge application to identify Hirschmann devices in your LAN, and assign IP addresses. Hirschmann products are delivered without a default IP address. This ensures that there is no chance of an IP address conflict, which could have a negative impact on a network.

Which switch is used for LAN?

An Ethernet switch creates networks and uses multiple ports to communicate between devices in the LAN. Ethernet switches differ from routers, which connect networks and use only a single LAN and WAN port.

What are the dimensions of the RS20 and RS30 devices?

Figure 14: Dimensions of device variants RS20…U/RS30…U with 8 to max. 10 ports Figure 15: Dimensions of device variants RS20…U/RS30…U with 16 to max. 26 ports 130 5.12 106 14 3,5 72 mm inch 2.84 4.17 0.55 0.14 mm inch 3,5 0.14 106 14 4.17 0.55 130 5.12 110 4.33

What is the difference between RS30 and Rs40 series?

RS30 series can accommodate from 8 to 24 port densities with 2 Gigabit ports and 8, 16 or 24 Fast Ethernet ports. The configurations includes 2 Gigabit ports with TX or SFP slots. RS40 series has 9 Gigabit ports.

What is the voltage range of the Rs40 device?

P: Voltage range 47 V DC to 52 V DC (PoE) 1.1.2 Combination options for the RS40 device variants The product designation of your device is made from combining the desired product characteristics in accordance with the following table. The corresponding short designation is in column 3.

What are the rs20/rs22/rs30/rs32/rs40 ports?

In device variants RS20 and RS22, these ports are DSC sockets or ST sockets. In device variants RS30, RS32 and RS40, these ports are SFP slots. The 100 Mbit/s F/O port allows you to connect network components according to the IEEE 802.3 100BASE-FX standard. This port supports: ・ｵFull or half duplex mode Default setting: Full duplex