## Can current source and voltage source be in series?

Ideal voltage sources can be connected together in both parallel or series the same as for any circuit element.

How do you do nodal analysis with voltage and current sources?

Basic Steps Used in Nodal Analysis

1. Select a node as the reference node. Assign voltages V1, V2… Vn-1 to the remaining nodes. The voltages are referenced with respect to the reference node.
2. Apply KCL to each of the non reference nodes.
3. Use Ohm’s law to express the branch currents in terms of node voltages.

### What is voltage dependent current source?

In the theory of electrical networks, a dependent source is a voltage source or a current source whose value depends on a voltage or current elsewhere in the network.

What happens when two voltage sources are connected in series?

A voltage source is an energy source that provides a constant voltage to a load. Two or more of these sources in series will equal the algebraic sum of all the sources connected in series.

#### Is voltage dependent on current?

The amount of current in a circuit depends on the amount of voltage and the amount of resistance in the circuit to oppose current flow. Just like voltage, resistance is a quantity relative between two points.

When the voltage sources are connected in series then?

## Can two current sources be connected in series?

Current sources are not allowed to be connected together in series, either of the same value or ones with different values.

How will you Analyse circuit containing dependent sources using Thevenin’s theorem?

Thevenin’s theorem can be applied when analyzing a circuit with dependent sources. In this case, all independent sources are turned off and the RTh is calculated by applying a current source or voltage source at the open terminal. When using a voltage source, it can be assumed to be 1V for simple calculations.

### What are dependent and independent sources?

Independent source are those, whose value of either the voltage or the current to be delivered is independent of any other parameter of the network. Where as the dependent sources are those, whose value of either the voltage or the current to be delivered is dependent or controlled on other parameters of the network.

What is node voltage analysis in circuit analysis?

The Node Voltage Method is an organized methods of analyzing a circuit. The Node Voltage Method is based on Kirchhoff’s Current Law. This technique is embedded inside the popular circuit simulator, . What is the circuit analysis challenge?

#### How to compare the node voltages?

Here’s how the node voltages compare if you have a voltage source: If the negative terminal of the voltage source is connected to a reference node, then the voltage of the node connected to the positive terminal of the voltage source has to be equal to the source voltage.

What is the power of the dependent current source?

Therefore the power of the dependent current source is . Because the current direction and the voltage polarity is in accordance with the passive sign convention and the power is negative, the dependent current source is supplying power. Hi! Yaz is here.

## What happens when a voltage source is connected to a node?

When a voltage source is connected to a node, you end up with fewer unknown node voltage equations because one of the node voltages is given in terms of the known voltage source. Here’s how the node voltages compare if you have a voltage source: