Can decoder be repaired?

DStv decoders which can be fixed or replaced MultiChoice is able to repair and refurbish the majority of older decoders, it said. Customers are usually given a refurbished model while their decoder is repaired.

Can I replace my old DStv decoder?

DStv subscribers can exchange the SD PVR, Dual View, UEC-manufacturer HD PVR 4 Tuner, or older single view decoders for various combinations of the DStv Explora, HD decoder and/or installation. To do this, the customer has to take the particular device and smartcard to a DStv service centre or agency.

How do you wire a DStv decoder?

Connect the cable from the satellite dish directly to the LNB input on the back of the decoder. Connect the cable from the satellite dish directly to the LNB input on the back of the decoder. Connect either cable from the satellite dish directly to the LNB input on the back of the decoder.

How much does DStv decoder repair cost?

The standard repair fee is R700 for an HDPVR / Explora and R320 for a Single View decoder. If you have decoder insurance, you will not be required to pay the repair fee as this is included in your cover.

How much does it cost to replace a DStv decoder?

The company charges a fee of R290 for a Single View decoder and R600 for a PVR for a standard repair. However, if you have an insurance cover, you will not be required to pay a dime. These are the DStv decoder models that if not supported, the insurance cover will take care of the repair charges: 1132/3U/Zappa.

How do I upgrade my decoder?

You can manually update the software as follows :

  1. Press the blue DStv button.
  2. Go to Settings.
  3. Select User Preferences.
  4. Select General.
  5. Select Download latest software.
  6. (If this option is greyed out, the decoder is already on the latest software)

What causes a decoder not to switch on?

A corrupt DStv system is the main cause of DStv decoder not powering up. When you make a decoder software upgrade incorrectly, it could corrupt your system and make it unable to boot. Your DStv system is usually loaded from the hard drive and a corrupt hard drive can cause the DStv decoder not powering up problem.

What to do if decoder stops working?

How To Fix Dstv Decoder Not Powering Up

  1. Turn off the decoder and switch off the power source.
  2. Remove the power cord from the decoder.
  3. Unplug all peripherals plugged in.
  4. After 10minutes, reconnect the power cable and see if the DStv decoder is powering up.

Can a DStv decoder be fixed?

The standard repair fee is R700 for an HDPVR / Explora and R320 for a Single View decoder. If you have decoder insurance, you will not be required to pay the repair fee as this is included in your cover. When you bring your decoder in, you will be given a refurbished model as a replacement.