Does Tascam dr40 have phantom power?

TASCAM DR-40X Handheld Recorder Features: Portable recorder for musicians, DSLR filmakers, podcasting, and field recording. Dual condenser microphones for A/B or XY stereo recording. XLR/TRS combo inputs (with phantom power) for your own mics or instruments.

Can Tascam dr40 be used as an audio interface?

Apart from handheld recording, the DR-40X can also be used as a USB audio interface with two inputs and outputs, making it a strong yet easy gear for voiceover work, live streaming, podcasting and songwriting with studio-quality audio.

Where is TASCAM made?

TASCAM is the professional audio division of TEAC Corporation, headquartered in Santa Fe Springs, California. TASCAM established the Home Recording phenomenon by creating the “Project Studio” and is credited as the inventor of the Portastudio, the first cassette-based multi-track home studio recorders.

How does the TASCAM dr40 microphone work?

This time they have equipped the DR40 with an inch-long rubber bar with feet at each end. This squeezes into the tripod’s stand-hole and lifts the front end about a centimetre clear of the desktop. The ’tilt foot’, as Tascam call it, helps angle the microphones towards the sound source and buffers desktop vibrations.

What is the best dr40 feature on the Roland dr40?

An audition speaker and tripod mount are located on the rear. Arguably, though, the best DR40 feature is the Overdub mode, when it’s set to Separate rather than Mix. In Mix mode, the incoming recording is mixed with the guide track, but Separate mode saves the new part as a discrete file.

What type of audio files does the dr-40 record?

It records standard WAV, BWAV and MP3 files. The DR-40 will function as a USB SD card reader so you can directly access the SD card and dump the sound files onto your mac or pc. Out of the box you’ll note the 2 built-in mics have wire metal bumper guards.

Does the dr40 come with a micro USB cable?

The DR 40 comes with a mini USB cable, not a micro USB like most phones use, so you will have to use that cable. The other issue is with the little rubber isolater foot that you’re supposed to fit into the tripod mount to lift the mics if you set the DR40 on a table to record.