Does the QSC KW181 have a crossover?

The KW181 has a low pass filter that it uses internally and QSC states the frequency response to be 38 – 124 Hz. The KW 181 does not have a crossover or high pass filter for routing mid/high audio to the tops.

Can I daisy chain powered speakers?

Yes you can daisy chain (most) active speakers.

How many watts is QSC KW181?

QSC KW181 1000 Watt 18″ Powered Subwoofer

SPECIFICATIONS KW181
AC Power Consumption (1/8 Power) 100 VAC, 2.3 A 120 VAC, 2.01 A 230 VAC, 1.13 A
Enclosure
Material 15 mm painted birch plywood
Finish Black textured paint

How do I connect my subwoofer to my main speakers?

Connect. If you are using your subwoofer with a home theater receiver, the connection is simple: Just run an audio interconnect cable like this one from the receiver’s subwoofer output to the subwoofer’s line input (pictured above). If the subwoofer has an input labeled LFE, use that one.

Can you run powered speakers through a powered mixer?

CAN I HOOK UP MY POWERED SPEAKERS TO IT? No. If your mixer is powered and sending an amplified signal, you will need to use passive speakers to properly operate your setup. Some powered mixers only send powered signals through the main outs.

How many amps does a QSC k12 use?

QSC K12.2 Specs

AC Input Power Universal: 100 to 240 VAC, 50 / 60 Hz
AC Power Connector 1 x IEC Input (Locking)
Current Consumption 100 VAC: 2.1 A (1/8 Power) 120 VAC: 1.9 A (1/8 Power) 240 VAC: 1.1 A (1/8 Power)

How many watts are QSC K12 speakers?

2000 W
QSC K12.2 Specs

Configuration Active 2-Way
Enclosure Type Bass-Reflex Loudspeaker/Floor Monitor
Total Power Capacity 2000 W
Amplifier Power Rating LF: 1800 W Peak HF: 225 W Peak
Amplifier Class Class-D

Can you use a powered subwoofer with a powered mixer?

1) EMX powered mixers have on their front panels a “MAIN” line output, generally both left and right. Connect the main out either left or right to the input of the self powered sub. Hint: if one main out is labeled mono, use that one.