How do I change the date and time on my DSC keypad?

DSC – Alpha Keypad, Set Time/Date

  1. Press * followed by 6.
  2. You will be asked to enter in your master access code. (
  3. Press the right arrow 2 times.
  4. press * to get you into the time and date programming.
  5. Enter in the Hour, minute, Month, Day, Year.

How do I set the date and time on my DSC 1832?

Instructions

  1. Press the * button, followed by 6.
  2. Enter your system’s master code.
  3. Press 1 to Select Time and Date programming.
  4. If you have a Full Message LCD Keypad, use the < or > keys to scroll to the menu options and press *.
  5. Using the number keys, enter the time in HH:MM format and date in MM:DD:YY format.

How do I reset my alarm panel?

You can reset your alarm system by powering it down and then powering it back on. This is what is known as a power reset. To power down the system, the backup battery must be disconnected, and the transformer must be unplugged. Then reconnect the battery and transformer to power it back on.

How do I set the time on my DSC maxsys?

Tech Tips: Change the Time & Date on a DSC Maxsys 4020 Commercial Security Alarm System Keypad

  1. Enter your system’s master code on your system’s keypad, then press 9 (If you do not know your system’s master code, call FMC’s Service Department)
  2. Press the < or > arrow keys to scroll until the Keypad says “Set System Time”

How to set date and time on a DSc panel?

To set the date and time on a DSC 1616, 1832 or 1864 you will go to your keypad and type *6 + 4-digit Master Code. You will then press 1 to get to the date and time entrance section. At this point you will first enter the time in Military (24 Hour) Format. For instance if it’s 2:30 PM you enter 1430.

How to program a DSc alarm?

– For numeric programming (codes) you simply type the new code on the 0-9 keypad. – For hexadecimal programming, you type 0-9 keypad for the numbers 0-9. – Alpha-numeric programming (zone names) is done 2 ways. Either with simple up/down arrows to select letters, or it is similar to sending text messages on a numeric keypad on a

How to set time and date on DSC security system?

Press the*button followed by 6

  • Enter your system’s master code (If you are an FMC customer and do not know your system’s master code,call FMC’s Service Department.
  • Press 1 to Select Time and Date programming
  • If you have a Full Message LCD Keypad (PK5500),use the < or > keys to scroll to the menu option and press*