How do I enable WiFi on CradlePoint?

Information

  1. Navigate to the Networking tab.
  2. Select Local Networks.
  3. Select the WiFi radio profile to edit. WiFi Radio #1 (2.4 GHz), WiFi Radio #2 (5 GHz), or Wireless (WiFi) Settings.
  4. Click on Disable/Enable.
  5. Click Yes.

What is force Nat?

Force NAT: Normally NAT is part of the Routing Mode setting which is selected on the LAN side in Network Settings → WiFi / Local Networks. Select this option to force NAT whenever this WAN device is being used. Priority: This number controls failover and failback order.

How do I connect to CradlePoint?

  1. Click START.
  2. Click CONTROL PANEL.
  3. Click NETWORK AND INTERNET.
  4. Click CONNECT TO A NETWORK (under network and sharing center) You’ll see a list of available wireless networks.
  5. Click the CradlePoint Network.
  6. Click CONNECT.

What is IP passthrough CradlePoint?

IP Passthrough mode, simply stated, disables the router functionality and provides the cellular WAN address directly to one attached network client. A new Cradlepoint device will display the “First Time Setup Wizard” the first time you connect to the modem.

How do I change my Cradlepoint router password?

Information

  1. Login to device locally or via NCM Remote Connect.
  2. Navigate to System > Administration > Router Security.
  3. Change Admin Password.
  4. Click Save​

How does NAT-T work?

Understanding NAT-T. Network Address Translation-Traversal (NAT-T) is a method for getting around IP address translation issues encountered when data protected by IPsec passes through a NAT device for address translation. Any changes to the IP addressing, which is the function of NAT, causes IKE to discard packets.

How do you test a Cradlepoint router?

Running a Speed Test

  1. Login to NetCloud Manager.
  2. Click DEVICES in the left-side navigation panel.
  3. On the Routers tab, click the name of the router to test.
  4. Click the Troubleshooting tab.
  5. Select the WAN interface to run the speed test from the Online WAN Interfaces drop-down menu.
  6. Click Start to run the speed test.

Why would I use IP passthrough?

IP Passthrough on a router from an ISP means the router bridges all traffic through to whatever is on the other side (whatever device is connected to the routers LAN port). This is useful if you have a device connected to the router and you want the global IP address from WAN on the router.

Is IP passthrough the same as DMZ?

DMZ mode is known as IP Passthrough on the Motorola RG’s NVG510 and newer. (note – in some versions IP Passthrough hands off a /32 subnet which does not include the gateway IP and so you should manually / statically assign the IP and subnet mask after it hands it off.)