How do I make my Plantronics Voyager Legend discoverable?

Voyager Legend: How to Pair

  1. Turn the headset on and then put it on.
  2. Activate Bluetooth on your phone and set it to search for a new device.
  3. Select “PLT_Legend.” If your phone asks for a passcode, enter four zeros (0000); otherwise, accept the connection.
  4. Once successfully paired, you will hear “pairing successful.”

How do I put my Plantronics Bluetooth in discovery mode?

Press and hold the call control/power button for 5 or 6 seconds until the light starts flashing an alternating red-blue (the Discovery 975 flashes an alternating red-white). Release the button and set the headset aside. Follow the pairing instructions for your cell phone or other Bluetooth device.

How do I put my Plantronics PLT headset in pairing mode?

Pair to Another Device

  1. Turn the headset on and then put it on.
  2. Press and hold the Call button until you hear “pairing.”
  3. While the headset LEDs are flashing blue and red, activate Bluetooth on your phone and set it to search for new devices.

How do I reset my Voyager Legend Bluetooth?

Plantronics Voyager Legend Reset: A How-To Guide

  1. Performing the Reset. Turn your Plantronics Voyager off. The on/off button is the slide switch on the back of the headset just above the charging contacts.
  2. Your Voyager should now be reset and ready to work with your Bluetooth devices. Turn it on to see if it works!

How do I pair my Plantronics Voyager with my iPhone?

To pair your Plantronics Bluetooth headset with your iPhone:

  1. On your iPhone, press Settings > General > Bluetooth.
  2. If Bluetooth is turned Off, tap to turn it On.
  3. Place your Bluetooth headset into pairing mode.
  4. When you see your Plantronics device name, tap it to pair and connect.

How do I reset my Plantronics legend?

How do I put my Voyager 5200 in pairing mode?

While the Voyager 5200s LEDs are flashing red/blue, activate Bluetooth on your phone and set it to search for new devices.

  1. iPhone Settings > General > Bluetooth > On.
  2. Android™ Smartphones Settings > Wireless & Networks > Bluetooth: On > Scan for devices.

How do I reset my Plantronics Voyager headset?

Hold down the MINUS (-) volume control and the black power button at the same time until the blue light goes out. Step 3 Wait 1 minute for the reset to power down the software and clear firmware.