How do I pair my A50 headset?

This step is only relevant if you’re using the Astro A50 2nd gen. Plug in the Xbox One Chat Cable to the bottom of the Xbox Controller until it snaps into place. Then, connect the other end to the cable port right below the microphone earcup, and you’re all set.

How do you pair Astro A50 Gen 2?

Begin pairing mode by simultaneously holding the power button on the MixAmp™ TxD unit and on the A50 headset until both of the buttons blink white. The LED indicators on both devices will show solid white for three seconds, indicating that pairing has occurred.

Can Astro A50 Bluetooth connect to phone?

Q: Can I connect the headset wirelessly with my smartphone? A: No, the headset does not have Bluetooth connectivity. However you can use any 3.5mm audio cable on the AUX port located on the Base Station to inject your own tunes.

How do I reset my A50 headset?

To reset your Astro A50 headset, make sure the power switch is in the ON position. Proceed to hold down both the Dolby button + the Game side of Game/Voice balance at the same time, for at least 15 seconds. This will hard reset your headset and it should work again.

How do I reset my Astro A50 Base Station?

ASTRO Gaming on Twitter: “@MarkRecks Hard reset your A50 by holding down the Power button + Game side of Game/Voice balance for 15 seconds” / Twitter.

What are the buttons on A50 headset?

On the ear cup itself, there are two buttons marked ‘game’ and ‘voice’. When you connect the Astro A50 to your computer, it will actually register as two USB sound devices, and these buttons allow you to adjust the sound balance between them: you can balance the sound from your game and your friends talking on Discord.

How do I pair my Samsung Bluetooth headset?

How to Connect Galaxy Buds to Other Android Devices

  1. Turn your Galaxy buds to pairing mode.
  2. Open the Bluetooth settings on your Android device, then turn it on. Turning on Android Bluetooth.
  3. Wait for your phone to detect the Galaxy Buds. Tap your Galaxy Buds’ name to start pairing. Pairing Galaxy Buds manually.

Why is my Astro A50 headset not working?

The first thing you need to try is to make sure the headset’s volume wheel is set to a reasonable value. Then, you need to check if the Base Station and your headset are synced together. Ensure the Mode Switch on the Base Station is set to the right device (PC or PS4).