How do I place my Bluetooth headset into pairing mode?

Put the headphones next to the device you want to connect it to. Make sure that the device is on. Press and hold the power button on your headphones for about 7 seconds. This will put it in pairing mode which will allow it to pair up with your device.

How do wireless earbuds connect to Photive?

After waiting for 10 seconds, the two headsets will automatically pair. A red and blue flash will appear on the right earbud (R) when the headset is in pairing mode, 2. It indicates that the headset is ready to connect to your device.

How long do Photive earbuds last?

Photive PH-BTE50 run on a built-in rechargeable lithium polymer battery that is able to give you about 8 hours of playtime and 300 hours of standby time. You can charge them with the included micro USB cable.

Can’t get both earbuds to pair?

Sync earbuds together by following steps below:

  1. Forget all “Wicked Driftr” in your device’s Bluetooth settings.
  2. Turn off Bluetooth setting on your device.
  3. Replace both earbuds back into the charging case.
  4. Remove earbuds from charging case.
  5. Turn Bluetooth back on on your device.

How do you pair a Photive?

The device name should be listed on your phone as PH-BTW55. If it is not listed, try pushing the pairing button on the top of the speaker in between the volume and select track buttons. This enables the pairing mode and the blue LED light will be flashing quickly.

How long does it take Photive earbuds to charge?

Battery Life Charging is easy. Included is a small micro USB charging cable that will refill the empty battery in under an hour. Just plug it into any USB port and it will power them up so they’re ready to use for another 7-8 hours of enjoyment.

What is the Bluetooth range of the photive bth3?

Bluetooth range easily met the 33ft advertised, and sustained listening at this distance was perfectly fine, though moving too far beyond quickly led to dropouts and skipping. The lithium-ion battery in the BTH3 is promised by Photive to provide a listening time of up to 12 hours.

Does the bth3 have a Play/Pause button?

Interestingly enough, this pair of headphones features a dedicated power button and separate play/pause button, unlike the multi-function button used on many headphones Speaking of buttons, the BTH3 headphones are packed with them. The left ear cup holds the aforementioned play/pause button as well as the forward / skip and rewind / back buttons.

Do photive btx6 and photive bth3 use the same drivers?

Both the Photive BTH3 and BTX6 use 40 mm drivers, though listening for just a few seconds makes it clear that these don’t use the same 40 mm drivers. The sonic signature of each pair of headphones is drastically different from the other, and seems to be aimed at different types of listeners.

Are bth3 headphones better than btx6 headphones?

Likely due to the fact that they aren’t collapsible, the BTH3 are more adjustable than the BTX6 headphones. The ear cups rotate quite a bit, and along with the adjustable headband, it’s pretty easy to find a good fit with these headphones. Don’t worry about carrying these around with you either.

https://www.youtube.com/watch?v=BdIbfnxFZ8Y