How do I reset my Cisco Linksys E1500?

To reset the Linksys E1500 to its default settings, you have to do the following steps:

  1. Turn on router.
  2. For at least 5 seconds, press the Reset button.
  3. Device is automatically restarted.
  4. Restoration of standard settings is finished.

How do I setup my Cisco Linksys E1500 router?

Configuration for Linksys routers: E1200, E1500, E2500, E3200, E4200, WRT160n

  1. Access the router’s browser-based utility. Log into your router’s browser-based utility by entering 192.168.
  2. Go to the “Setup” menu. Click on the “Setup” tab.
  3. Go to the “Basic Setup” page.
  4. Enter the first DNS resolver.
  5. Save your settings.

How do I reset the admin password on my router?

If you can’t access the router’s web-based setup page or forgot the router’s password, you may reset the router to its default factory settings. To do this, press and hold the Reset button for 10 seconds. NOTE: Resetting your router to its default factory settings will also reset your router’s password.

What is the default password Linksys E900 router?

admin
What are the default IP Address, username, and password of the Linksys E900? The default IP Address is 192.168. 1.1 and the username and password are both “admin”. 3.

How do I log into my Linksys E1500?

What default IP address, username and password are used to login to the Linksys Wi-Fi Router, E1500 web-based setup page? The default IP address is 192.168. 1.1. The username and the password is admin.

How do you reset your Linksys router?

1 Factory Reset

  1. Ensure the router is ON.
  2. Using a paper clip, push and hold the Reset button.
  3. Hold the reset switch for 10-15 seconds.
  4. Disconnect and reconnect the router’s power adapter.
  5. Once it fully reboots, you can use the default username and password to connect the device.

How do I reset my Cisco E900 router password?

Help! The E900 Default Password Doesn’t Work!

  1. Plug in the router and turn on the power.
  2. Flip it over on its top so that you have access to the bottom.
  3. With a paperclip or other small and sharp object, press and hold the Reset button (it’s accessible through a tiny hole on the bottom of the router) for 5 to 10 seconds.