How do I set up tx500e?

To change the swing setting:

  1. Ensure dial is in Run position.
  2. Press the “Next” button and the “Hold” button at the same time and then let go.
  3. You will see a number between 1 and 9 pop up in the display.
  4. Use the up and down buttons to adjust this to the desired level.

How do I unlock tx500e?

Reconfigure and reprogram as necessary. Thermostat is locked or cant adjust display Press the NEXT button three times then press the HOLD button once, this key sequence locks and unlocks your thermostat.

How do I reset my Lux tx500e thermostat?

How do I reset my thermostat?

  1. Take the front of the thermostat off the wall and look for a small white round reset button on the right side labeled “H.W. Reset”.
  2. Hold this button down for at least 5 seconds.
  3. The screen should fully populate temporarily.

How do you clear a thermostat override?

To clear OVERRIDE press UP/DOWN until original set temperature appears or wait for the start tf the next period. Press HOLD. Adjust temperature as desired with UP/DOWN. To clear, press HOLD again.

Why is my LUX thermostat not working?

If your Luxpro thermostat stops working, first replace the batteries. Also check the circuit breaker, reset the thermostat, and check if the wires are faulty.

How do you unlock a digital carrier thermostat?

How to Unlock a Carrier Thermostat

  1. Press and hold down “MODE.”
  2. Press both the “Up” and “Down” arrow buttons simultaneously.
  3. Wait a second. The “Locked” icon disappears from the screen. You can now use your Carrier thermostat as normal.

How do you troubleshoot a Lux thermostat?

Luxpro Thermostat Not Working: Try These Troubleshooting Tips

  1. Restart Your Device. This is the first thing you want to do whenever you have any issue with your Luxpro Thermostat.
  2. Reset the Thermostat (Software Reset)
  3. Check and Replace the Batteries.
  4. Check for Any Wiring Issue.
  5. Clean the Thermostat.