How do I setup port forwarding on SonicWall?

How to Enable Port Forwarding

  1. Add Service. Go to section called “friendly service names – add service”
  2. Add All services into “Service Group”
  3. Add Address Object.
  4. Add Inbound NAT.
  5. Add Outbound NAT.
  6. Add Access Rules – WAN to LAN.
  7. Add Hair Pin or Loopback NAT for sites lacking an Internal DNS Server.

How do I allow a port in SonicWall firewall?

How to Open a Port on SonicWALL

  1. Type “http://192.168.168.168/” in the address bar of your web browser and press “Enter.” This will open the SonicWALL login page.
  2. Type “admin” in the space next to “Username.” Enter “password” in the “Password” field.
  3. Select “Public Server Rule” from the menu and click “Next.”

How do I access SonicWall TZ 215?

Open a webbrowser connected to the X0 interface and type in https://192.168.168.168 for acess to the SonicWall GUI. You can either run through the Setup Wizard or log directly into the management interface. The default credentials for logging in are username: adminand password: password.

How do I enable port forwarding?

Set Up Port Forwarding

  1. Log in to the router as admin.
  2. Locate the port forwarding options.
  3. Type the port number or port range that you want to forward.
  4. Choose a protocol, either TCP or UDP ports.
  5. Type the static IP address you chose.
  6. Enable the port forwarding rule with an Enable or On option.

What port does SonicWall use?

The SonicWall uses default ports of 80 and 443 for HTTP and HTTPS management. These can be changed by logging into the UTM appliance by using a web browser and under the System | Administration page and make sure that new management ports doesn’t conflict with any of the ports that the firewall is listening on.

How do I access SonicWall through console port?

You log into the SonicWall management Interface using https://IP Address where the IP address is the SonicWall LAN IP address.

  1. EXAMPLE: If the LAN IP address of your SonicWall appliance is 192.168.
  2. EXAMPLE: If you configure the port to be 76, then you must enter http://192.168.168.1:76 into the Web browser.

Is port forwarding same as NAT?

In computer networking, port forwarding or port mapping is an application of network address translation (NAT) that redirects a communication request from one address and port number combination to another while the packets are traversing a network gateway, such as a router or firewall.