How do I use the ilom console?

Access the Host Console From the Oracle ILOM CLI

  1. Log in to the Oracle ILOM command-line interface.
  2. Type start /HOST/console.
  3. Type y to confirm that you want to access the host console.
  4. If you are prompted for user credentials, enter the requested information to access the host server operating system.

How do I connect my ilom web interface?

How to Log In to the ILOM Web Interface Using an Ethernet Connection

  1. To log in, type the IP address of node’s ILOM in to your web browser. The web interface Login page appears.
  2. Type your user name and password. Tip – The default ILOM administrator account user name is root and the password is changeme.
  3. Click Log In.

How do I enable components in ilom?

To enable or disable the state of a chassis component, follow these steps:

  1. Log in to the Oracle ILOM SP CLI or CMM CLI.
  2. At the Oracle ILOM command prompt, type: -> set target component_state=[enabled|disabled] For example: -> set /SYS/MB/CMP0/P0/C0 component_state=enabled Set ‘component_state’ to ‘enabled’

How do I check ilom hardware faults?

How to View Fault Status Using the Oracle ILOM Command-Line…

  1. Use the command: -> show /SP/faultmgmt. You see output similar to the following: -> show /SP/faultmgmt /SP/faultmgmt Targets: shell 0 (/SYS) 1 (/SYS/BL1) 2 (/SYS/BL2) Properties: Commands: cd show.
  2. Use the command: ->show faulty.

How can I check my ilom power supply?

Check the Power State of the Server or Host (Oracle ILOM)

  1. Log in to Oracle ILOM. See Log In to Oracle ILOM (Service).
  2. Determine if the system or domain has power. To check the power status of a domain on a single-domain server, at the Oracle ILOM prompt, type: -> show /System power_state.
  3. Determine your next step.

How do I read my ilom snapshot?

JavaScript is required to for searching….Using the Oracle ILOM Snapshot Utility (Web)

  1. Log in to the Oracle ILOM SP web interface.
  2. Click Maintenance –> Snapshot.
  3. Select the data set: Normal, FRUID, Full, or Custom.
  4. If you want to collect only log files from the data set, click the Enabled check box.

How do I find my ilom IP address?

How to Display the ILOM IP Address Using the Web Interface

  1. Type your user name and password.
  2. Click Log In.
  3. Select the blade and node to view from the left pane.
  4. Make a note of the node’s SP IP address.
  5. Repeat Step 4 to find the IP address for the server’s other node SP.

What is ilom IP address?

The default ILOM IP address is 192.168. 1.200 (netmask 255.255. 255.0 ). You can use either the CLI or the web interface to access ILOM.

How do I clear my ilom fault?

How to Clear Faults Using the Oracle ILOM Command-Line Interface

  1. Log in to the Oracle ILOM CLI.
  2. Use the following command to clear the fault for a specific component. –>set pathtocomponent clear_fault_action=true. where pathtocomponent is the path to the component for which you want to clear the fault. For example:

How do I reset my ilom console?

Reset Oracle ILOM

  1. To reset the Oracle ILOM server SP from the web interface, click Maintenance –> Reset SP –> Reset SP.
  2. To reset the Oracle ILOM server SP from the CLI, type: -> reset /SP.

How can I check my ilom status in Exadata?

What is Oracle Exadata ilom?

Oracle’s Integrated Lights Out Manager (ILOM) provides advanced service processor hardware and software that you can use to manage and monitor your Oracle Sun servers.

What does ilom do?

ILOM enables you to actively manage and monitor the server independently of the operating system state, providing you with a reliable Lights Out Management (LOM) system. With ILOM, you can proactively: Learn about hardware errors and faults as they occur. Remotely control the power state of your server.

How do I access ilom web interface?

Follow these steps to log in to the ILOM web interface:

  1. To log in to the web interface, type the IP address of ILOM into your web browser. The web interface Login page appears. FIGURE 4-2 Login Page.
  2. Type your user name and password. You can use the default user name and password. Default user name – root.
  3. Click Log In.

What is ilom IP?

6.3. The default ILOM IP address is 192.168. 1.200 . Ensure that SSH is chosen as the Connection Type.

How do you clear fault on ilom?

How can I check fault in ilom?

How to View Fault Status Using the Oracle ILOM Command-Line…

  1. Log in to the Oracle ILOM CLI.
  2. There are two ways to view faults through the CLI: Use the command: -> show /SP/faultmgmt.

How can I break ilom password?

You cannot change or delete the default user account.

  1. Establish a local serial management connection to ILOM and log in to ILOM using the default user account.
  2. Prove physical presence at your server.
  3. Return to your serial console and press Enter.
  4. Type the password for the default user account: defaultpassword.

https://www.youtube.com/watch?v=zpumAikqz5c