## How do you convert kinematics to dynamic viscosity?

Density actually provides a way to convert between a kinematic and a dynamic viscosity measurement. The formula for the conversion is: Kinematic (cSt) x Density = Dynamic (cP)

## How do you convert cSt to SSU?

Example: Converting Centistokes to SSU Viscosity Calculate 4ac = 4 × 0.226 × -195 = -176.28. Calculate 2a = 2 × 0.226 = 0.452. Calculate SQRT(b2 -4ac) = √1076.28 = 32.81. Calculate SSU viscosity t = [-b + SQRT(b2 -4ac)] / [2a] = 138.9 seconds.

How do you calculate dynamic viscosity?

Dynamic viscosity (sometimes referred to as Absolute viscosity) is obtained by dividing the Shear stress by the rate of shear strain.

What is the relation between dynamic viscosity and kinematic viscosity?

Kinematic viscosity is expressed as the ratio of fluid dynamic viscosity to its density. The unit of measurement is m2s-1. Any two different fluids can have the same dynamic viscosity but will never have the same kinematic viscosity because of the density difference.

### Is dynamic and kinematic viscosity the same?

Kinematic viscosity incorporates fluid density as part of its measurement. Thus, dynamic viscosity is a measure of force, while kinematic viscosity is a measure of velocity. That’s the difference. If you divide kinematic viscosity by the fluid density, you get absolute viscosity.

### How do you convert poise to centipoise?

Please provide values below to convert poise [P] to centipoise [cP], or vice versa….Poise to Centipoise Conversion Table.

Poise [P] Centipoise [cP]
0.01 P 1 cP
0.1 P 10 cP
1 P 100 cP
2 P 200 cP

What is SSU viscosity unit?

SSU viscosity means the number of seconds it takes 60 cubic centimeters of an oil to flow through the standard orifice of a Saybolt Universal viscometer at 100 degrees Fahrenheit.

How do I convert cPs to Mpas?

A centipoise is one millipascal-second (mPa·s) in SI units. (1 cP = 10-2P = 10-3 Pa·s) Centipoise is properly abbreviated cP, but the alternate abbreviations cps and cPs are also commonly seen.