How do you fix a boiler that loses pressure?
How do you fix a boiler that loses pressure?
Top tip!
- Switch off and allow your boiler to cool.
- Double-check that both ends of the filling loop are securely attached.
- Open both valves, to allow cold mains water into the system (you should hear it)
- Wait for the pressure gauge to read 1.5 bar.
- Close both valves, one after the other.
Why do I have to keep topping up my boiler?
The reason we top up the system when it has cooled is that when the central heating heats up the water expands and causes the pressure to increase, this is normal and no need to worry, but if you have the initial pressure too high it means when the water heats up it will over pressurise and will then discharge through …
Why is my heating system losing pressure?
There are two main problems that typically cause a loss of pressure – water escaping somewhere in the system or a failure of the expansion valve and resulting damage to the pressure relief valve.
How often should a boiler lose pressure?
Ideally, you shouldn’t need to top up your boiler pressure very often. But if the pressure drops more than once or twice a year, check all visible pipes for signs of water leaks. You might also find green deposits near joins in copper pipework, or stains on the skirting boards or ceilings.
Why does combi boiler keep losing pressure?
Your combi boiler can be losing pressure for a number of reasons. Pressure loss may be caused from a leak in the pressure relief valve, an issue in the expansion vessel, air in your system, or a leak in the heating pipework itself.
What pressure should a boiler be at when heating is on?
between 1 and 2 bars
What pressure should my boiler be when the heating is on? A boiler’s pressure gauge will usually sit between 1 and 2 bars when it is turned on. The exact recommended pressure level will vary depending on the boiler manufacturer, but generally, anywhere between 1.0 and 2.0 bar is ideal.
