How do you fix a stuck boot loop on a Kindle Fire?

Turn the device on and wait for the Kindle Fire logo to appear. Press and hold the power button for 20 to 30 seconds to initiate a hard reset, which reboots the device and often fixes the errors that can cause a boot loop.

How do I revive a dead Kindle Fire?

Perform a soft reset. A soft reset resolves many common issues without affecting any data on the device. Press and hold the Power button for 40 seconds, then release. The charge indicator light should turn on after several seconds, and then the Kindle Fire should reboot.

Why is Kindle Fire not turning on?

There are basically three reasons that a Fire might not turn on: A software problem may have bricked the device (fairly unlikely), a hardware component in the tablet may have failed (more likely), or finally, something might be wrong with the battery (most likely).

How do you unfreeze a Kindle?

Much like on a computer, the reboot process forces your Kindle to close down its current screen and restart itself at the homepage. To reset your Kindle, press the power switch for at least 20 seconds; when you release the switch, a reboot screen will appear on your Kindle and the device should be unfrozen.

What makes a Kindle Fire freeze up?

Very hot or cold environments negatively affect the processor. In some rare instances, cases or sleeves have been known to impact upon the performance of the Fire tablets. If you have a recurring problem with your tablet freezing up, try using it without a case for a while to see if it solves the issue.

Is my Kindle Fire dead?

If resetting doesn’t work, it’s possible that your battery is dead. Try plugging the Kindle Fire into the charger and wait about 15 minutes before trying to turn it on again. If the device refuses to start up, try resetting it again. If it still won’t turn on, it’s possible that you have a dead charging cable.