How do you reset a VOIP phone?

The following guide will help you factory reset your Cisco IP 7841 Phone….Factory Reset Cisco IP Phone 7841 (Using Keypad)

Step 1 Unplug the phone’s LAN cable.
Step 2 Wait 5 seconds.
Step 3 Press and hold # button while plugging the phone back in.
Step 4 Release the # button when the light on the handset blinks red 2 times

How do I factory reset my SPA514G?

You can reset Cisco SPA302, SPA303, SPA501G, SPA502G, SPA504G, SPA508G, SPA509G, SPA512G, and SPA514G phones by following the steps below:

  1. Press the Menu button.
  2. Press Setting.
  3. Navigate down to Factory Reset option.
  4. Press select.

How do I reset my Cisco IP phone SPA504G?

Cisco SPA501G, 502G, 504G, 508G, 509G, 525G – Manual…

  1. On the phone press the setup button.
  2. Use the directional pad and go down to Factory Reset.
  3. Click OK to perform the factory reset, the phone should now reboot and default back to the factory default configuration.

How do I factory reset my 7861?

Factory Reset

  1. Press the Settings button.
  2. Select Device Administration > Factory Reset > Ok. Result: The phone will automatically reboot.

How do I reset my PBX?

Reset the PBX

  1. Go to Maintenance > Reset.
  2. Select which data that you want to reset. Reset All: Factory reset all the data and configurations on the PBX. Reset IP: Reset the PBX’s IP address to 192.168. 5.150.
  3. Click Factory Reset.
  4. Enter the verification code.
  5. Click Reset.

How do I reset my Cisco VOIP phone?

Reset Specific models:

  1. Unplug the power cable from the phone, then plug it back in. The phone begins its power-up cycle.
  2. While the phone is powering up, press and hold # button until the Line LED turns green.
  3. Release the # button and press 123456789*0# The line button LED turns red.

How do I reboot my phone system?

Android users:

  1. Press and hold the “Power” button until you see the “Options” menu.
  2. Select either “Restart” or “Power off”. If you choose “Power off”, you can turn your device back on again by pressing and holding the “Power” button.