How many lumens is a 175 watt metal halide lamp?

14000 lumen
These 175 watt metal halide bulbs have a bright 14000 lumen output. They are mogul base (E39), ED28 bulbs with an average life span of 10, 000 hours. Use in street lights, parking lot fixtures, perimeter lighting, and other commercial and industrial lighting applications. ANSI Code M57.

What is the lumen output of a 250w metal halide lamp?

This is increasing common in commercial and industrial applications. For example, suppose you have a parking lot light that uses a 250-watt metal halide HID lamp. That 250-watt bulb outputs roughly 14,000 lumens (on average) in all directions.

Which HID lamp has the shortest restrike time?

HIGH PRESSURE SODIUM Restrike time is about one minute — very short, as HID restrike times go.

How many lumens is a 1500w metal halide?

A metal halide sports lighter with a 1,500-watt lamp and ballast emits 64,000 mean luminaire lumens and uses 1,605 watts of energy.

Can you convert a metal halide light to LED?

Light-emitting diode (LED) technology advancements now allow you to retrofit your metal halide lamps with a simple bulb change. LEDs can give you comparable lumens at a fraction of the energy cost. They are also longer-lived and show a lower reduction of performance over their service life.

WHAT LED is equivalent to 400W metal halide?

The recommended replacement for the 400W metal halide flood is the 120W HyLite LED Prizm, producing approximately 13,000 lumens.

Are metal halide bulbs being phased out?

New Energy Law to Phase Out Today’s Common Incandescent Lamps, Probe-Start Metal Halide Magnetic Ballasted Fixtures. On December 19, President Bush signed H.R. 6, the Energy Independence and Security Act of 2007, into law (Public Law 110-140).

Can you replace metal halide bulbs with LED?

A 400 watt metal halide bulb can be replaced with a 200 watt LED. A 100 watt metal halide can be replaced with a 50 watt LED. Implementing an LED replacement program should result in a 50% reduction in annual energy use (kWh) costs. It may also lower electric demand (kW) charges.

Which type of HID lamp is the most efficacious?

metal halide lamp
The metal halide lamp is the next most efficacious lamp, and it is the most efficient of the HID lamp ‘white-light’ sources. Metal halide lamps offer initial efficacies of 110 lumens per watt for a 400 watt pulse start, but with a 65 CRI – a significantly improved color rendering ability compared to HPS and LPS.

What is the LED equivalent of a 1500 watt metal halide?

1500 watt metal halide sports lights can be replaced with 450-600 watt LED’s because wattage is a measurement of how much power is needed to run a light, not how much light it gives off.

Is there an LED replacement for metal halide?

Which is better metal halide lamp vs LED?

LEDs tend to last much longer and are a more energy efficient and less maintenance intensive technology. Metal halides have long warm-up periods and a shorter lifespan but produce a very high quality light and are one of the most efficient lights when it comes to very cool color temperature outputs.

Is LED brighter than metal halide?

However, even more to the point, LEDs retain at least 70% of their initial lumens throughout the duration of their lifespan. At approximately 100,000 hours, that means an LED not only stays brighter longer, it also lasts three to five times as long as a metal halide version.

Is xenon the same as HID?

HID is a type of light fixture that creates brighter light, and lasts longer, while Xenon is a subtype of HID that contains Xenon gas instead of the other alternatives.

Which lights are better LED or HID?

Brightness: LED lights can have a brightness of 9,000-10,000 lumens while HID might have 8,000 lumens. Both, however, are brighter than traditional halogen lights. Technology: LED lights use electricity while HID uses gas (typically xenon).

How many lumens is a 1500 watt halogen?

33,000
Product Attributes

Life Hours 2,000
Wattage 1,500 Watt
Lumens 33,000
Voltage 240
Base Type R7s

Can you put an LED bulb in a metal halide fixture?

What is the average life of a metal halide lamp?

6,000 hours to 15,000 hours
Metal Halide lights have an better lifespan relative to old technology like incandescent lights but they have a short lifespan compared to LED. Typical lifespan values range from 6,000 hours to 15,000 hours before a bulb requires replacement.