How many square feet does a bag of Thoroseal cover?

Yield per 50-pound bag: Base coat: 225 square feet at 1/16 inch dry-film thickness • OR Top coat: 450 square feet at 1/32 inch dry-film thickness • Coverage will vary depending on surface texture and porosity.

How many coats of Thoroseal are there?

Super Thoroseal Coverage & Price Coverage is up to 105 sq. ft. and requires two coats to achieve watertight seal.

What is Thoroseal used for?

Thoroseal® 550i is a ready-to-use polymer-modified cement-based coating. It is used to waterproof and protect concrete, mortar, and masonry surfaces requiring either positive- or negative-side waterproofing. Thoroseal® 550i can be applied by low-pressure spraying or hand troweling.

How long does Thoroseal take to cure?

Allow Thoroseal® Foundation Coating to cure 7 – 10 days before immersion in water.

Is Thoroseal waterproof?

Super Thoroseal® Waterproof Coating is a powder, cement-based waterproofing product for protecting concrete and masonry substrates. Easy to use, just add water. Coating can be applied to interiors and exteriors, above or below ground. Weatherproofs, seals out dampness with long lasting, decorative white finish.

How much Thoroseal do I need?

A two layer application will require a minimum of 2,5 kg powder per m². Note that the quantities required may increase by up to 50% on rough substrates. 25 kg sack. THOROSEAL should be stored under cover and clear of the ground.

What is the best product to seal basement walls?

When sealing basement floors and foundation walls the best concrete sealers to use are the Lithi-Tek 4500 primer followed by the Siloxa-Tek 8510 waterproofing sealer. If you are going to be installing flooring in the basement, it is best to use a moisture vapor barrier coating like the Vapor-Tek 440.

How do you apply Thoroseal?

Start at the top and work down. Use a tampico fiber brush to apply Super Thoroseal® in a thick coat, working the mixture into the pores of the surface for a good penetrating seal. Double back and use the brush to smooth out the material. Allow 12 hours between coats for drying time.

Does Thoroseal come in colors?

Coverage will vary depending on surface texture and porosity. White and standard gray (this color is not uniform) Custom and landscape colors are available for 5,000 lbs (2,268 kg) minimum order.