Is 5050 SMD good?
Is 5050 SMD good?
Theoretically, comparing the same number of chips, SMD 5050 LEDs can offer a light output 3 times that of the 3528 strips, and therefore the 5050 LED is well suited for lighting up areas that may be subject to high levels of ambient light.
What does 5050 mean for LED lights?
The 5050 is an RGB strip whose chips measure 5.0mm by 5.0mm. They have 3 LED diodes in each casing called tri-chips, which gives them a very bright glare when turned on at full power.
Is 5050 LED good?
The 5050 diodes are best suited for single color applications because of their intense brightness; if they were to use flashing colors, it would create eye issues for anyone staring at them. The 5050 LED uses about 60mA of power, has a surface area of 25mm squared, and a brightness of 22 lumens.
What is LED 5050 SMD?
5050 SMDs used in RGB LED strip lighting The 5050 SMD is actually a ‘tri’ chip, meaning it has three smaller chips in every SMD. So each white LED actually has three white chips inside. 5050s can also be used for colour-changing LED tape, with red, green and blue chips inside each LED.
What’s the difference between 5050 and 3528 LED?
The 3528 typically contains a single 20 mA LED chip (approximately 0.06 Watts) and a 5050 typically contains three 20 mA LED chips (approximately 0.2 Watts). Therefore, a single 5050 LED package has the capacity of 3x 3528 LEDs.
Which is brighter LED 5050 or 2835?
As mentioned above the 2835 SMDs can produce 360 to 720 lumens of light per meter of the light strip, depending on the LED density, however, the 5050 LED strip can produce up to a 1000 lumens per meter of light. This makes it perfect for lighting larger spaces like airports, hospitals, warehouses, factories, and more.
Is RGB 5050 addressable?
The most common types of SMD are: 3528, single colour, non-addressable, very low power; 5050, containing three LEDs allowing for RGB and addressable strips as well as higher power levels; 2835, a newer single-color SMD having the same surface dimensions as the 3528 but a larger emitter area and a thinner design with an …
What brighter 5050 or 2835?
How much power does a 5050 LED strip use?
The 5050 regular density LED light strip is listed at two watts per foot, so for thirty feet of light, you’ll be drawing sixty watts of power, and as it just so happens, we’ve got sixty watt power supplies!
Which is better LED or SMD?
One of the biggest improvements is that SMD spotlights offer a higher lumen output for a lower energy consumption – making them more powerful and energy efficient than older LED lights. This is because they work on the principle that fewer and larger SMD LEDs produce a greater lumen output.
Are SMD LEDs better?
Although a COB LED is efficient, an SMD LED has an even greater level of efficiency. That’s because more lumens are produced per watt. In other words, you’ll receive more light with less wattage. An SMD LED also produces a broader light beam, which means the light doesn’t need as large of a heat sink as a COB LED does.
What does SMD mean for LED lights?
surface mounted diode
SMD means surface mounted diode. This is a better technology than the first generation DIP LEDs. The SMD type LEDs are mounted on an aluminum substrate and enveloped in an epoxy resin.
How many lumens is a 5050 SMD LED?
Larger 5050 SMD LED chips are rated at 15 lumens per chip. Our most common 5050 bulb uses 24 chips, so its calculated lumen output is 360 lumens (15 x 24 = 360 lumens).
CAN 5050 LED strip lights be cut?
RGB (Red, Green, Blue, colour changing). Both require a 12V Power Supply, do not connect directly to 230V supply. The Strip is 14.4W per m, hence for 1m you will need a 15W power Supply, 5m – 80W and so on. The strip comes in 5m reels and can be cut with scissors every 3 LEDs.