Is Samsung discontinuing SmartThings?

If you have a SmartThings V1 Hub then, as of 30 June it will no longer work. V2 and V3 SmartThings Hubs will continue to work for now, so there’s less pressure on upgrading.

How do I run Z-Wave repair SmartThings?

  1. click on the three bars in the upper left of the screen.
  2. choose Devices.
  3. locate your hub in the device list and click on it.
  4. from the 3 dots in the upper right of the screen, select Z-Wave Utilities.

How do you troubleshoot SmartThings?

  1. Take Your Phone Closer to Your Wi-Fi Router.
  2. Remove Other Devices from Your Wi-Fi Network.
  3. Monitor Your Data Usage.
  4. Move Other Electronic Devices Away from Your Router.
  5. Update Your SmartThings App.
  6. Update Your Phone’s System.
  7. Install the Latest Version of Your Wi-Fi Router’s Firmware.
  8. Disable Battery Saver on Your Phone.

How do I fix SmartThings hub?

SmartThings device does not respond or the status is disconnected or incorrect

  1. Check the hub’s power and LED indicator.
  2. Verify the device is powered on (options will vary by the device).
  3. If required, verify the device is set up correctly with its native app.
  4. Check the range between the hub and the device.

What is going on with Samsung SmartThings?

Samsung said this week that the original Hub, which arrived back in 2013, will be retired after June 30, 2021. After this date the Hub will no longer function properly. Instead, it will only allow SmartThings users to see devices that are connected to their system, but not control them.

Will there be a new SmartThings hub?

Samsung is rolling out new hubs and appliances for its SmartThings platform. Samsung is making a dedicated Home Hub for its SmartThings platform, along with more fridges with built-in touchscreens. Samsung is teasing a SmartThings hub for its compatible devices.

What is a Z-Wave repair?

When you initiate a Z-Wave Repair, you are telling each Z-Wave device on the network to re-establish which other Z-Wave repeaters are closest and will provide an efficient signal route to your hub.

How long does Z-Wave repair take?

5 to 30 minutes
What is Z Wave repair? Typically from 5 to 30 minutes depending on the number of devices and yes as @The_Holocron said you can run it from the IDE but I would recommend reporting your issue to [email protected] so they can log a ticket and fix it eventually.

How do I restart SmartThings?

Reboot the modem connected to SmartThings Wifi Unplug the modem and SmartThings Wifi hub, and wait two minutes for both devices to fully power off. Then, plug them back in.

What happened to Samsung Smart Hub?

Is there a better app than SmartThings?

The best alternative is Home-Assistant.io, which is both free and Open Source. Other great apps like SmartThings are openHAB, Google Home, Domoticz and ioBroker. SmartThings alternatives are mainly Home Automation Tools but may also be Media Players.

Is SmartThings ZigBee or Z-Wave?

The SmartThings Hub contains internal Z-Wave and ZigBee radio antennae to communicate wirelessly with Z-Wave and ZigBee devices. The Hub acts as the primary controller for the Z-Wave and ZigBee networks.

What does Z-Wave repair do?

Does SmartThings support Z-Wave?

The SmartThings Hub is a Z-Wave certified central static controller. It can be included in any Z-Wave network and operate with Z-Wave certified devices from other manufacturers.

What’s the difference between reboot and reset?

Restart/reboot vs reset, reset is different from reboot/restart. Reboot/restart doesn’t change things on your computer, while reset will change things in your computer. Resetting means erasing and restoring. To reset a computer is to revert it back to the status when it was first purchased.

How do I reconnect my SmartThings device?

Solution 4: Reboot Your SmartThings Hub

  1. Unplug the ethernet and power cables. If your Hub has batteries (second generation and above), remove those too.
  2. Wait for about 30 seconds, and then reconnect the batteries and cables.
  3. Wait for the solid green light to come on. Once it does, your Hub is ready.

Does SmartThings only work with Samsung?

The SmartThings app is universal, working on Android and iPhone to control SmartThings hardware and compatible devices, although the functionality between Samsung and non-Samsung devices is slightly different. SmartThings is both a range of branded smart home products and the platform that controls them.