What can you put on battery post to prevent corrosion?

After removing the terminals, you can apply anti-corrosion washers or a small amount of dielectric grease on your battery’s posts. Another great anti-corrosion chemical is the AMSOIL heavy-duty metal protector, which can also be used to prevent rust.

What eats corrosion on battery terminals?

Apply baking soda over the entire area that’s affected by corrosion. This will neutralize the battery acid. Add a small amount of water to activate the baking soda and cause a chemical reaction which will remove the corrosion.

What should I put on my battery post?

Once the terminals are dry, dab a bit of petroleum jelly onto them. This will lubricate them, help prevent further corrosion, and help strengthen the connection. Reattach the positive and negative cables, and you’re all set! Be careful, too much petroleum jelly can cause a poor connection.

Is Vaseline electrically conductive?

In fact, Vaseline is an electrical conductor. You prefer other forms of grease because of that. It’s purpose is to fill any air gaps that would promote ozone build up in the joint.

Should you put grease on battery terminals?

You should put grease on terminals to prevent corrosion formation, but it is not necessary. The battery will work either way, as long as terminals and clamps are clean out of the corrosion and they are connected and well tight together.

Can Coke clean battery terminals?

You can even get rid of an anthill by liberally dousing the area with Coke. Coke can be used to clean car battery terminals; the slight acidity does not react with battery acid, so you can pour it over the battery and let it wash away corrosion.

Does grease prevent battery corrosion?

Apply battery-terminal grease to the terminals to help prevent corrosion. It’s available at any auto parts store and usually comes in a little ketchup-like packet. Another great option is AMSOIL Heavy-Duty Metal Protector.

What is the best thing to put on battery terminals?

The best and the most recommended grease to put on battery terminals to protect them from corrosion is silicone dielectric grease. Dielectric grease prevents acid vapors and water from getting inside contacts making them corrode.