What chemicals should I put in my pool when closing?
What chemicals should I put in my pool when closing?
What chemicals do I need to close my pool?
- Chlorine.
- Pool Shock.
- Soda Ash.
- Baking Soda.
- Muriatic Acid.
- Winter Algaecide.
- Pool Antifreeze.
- Stain and Scale Prevention.
Should you clean pool before closing?
Cleaning your pool before closing for the winter prevents algae and makes your spring opening even easier. Make sure to thoroughly brush the sides and floor, skim the surface and clean out the skimmer and pump baskets after vacuuming the pool.
How long should pool closing chemicals circulate?
Circulate your water for at least four hours to allow the product to disperse throughout the pool.
Can you use liquid chlorine to close a pool?
Super chlorinate with liquid chlorine or other chlorine source and add winterizing chemical kit to pool; allow filter to circulate to evenly distribute chemicals. (Use chemicals as labels indicate.) Use 1 gallon of liquid chlorine per 10,000 gallons of pool water.
Should I put algaecide in my pool when closing?
By simply adding algaecide to your water prior to closing, you can prevent algae growth from occurring during the cold, winter months which makes for an easier opening in the spring. You can apply algaecide directly to the pool water and allow the pump to continue to circulate for approximately two to four hours.
How much shock do I add to pool when closing?
The best time to add these chemicals is the night before you close your pool and then let the filter run overnight to circulate them. “Backwash” your filter thoroughly in the morning before you move on to step 3. The Proper Chemicals: -Add 1 lb Granular Shock OR 1 gal. Liquid Shock per 5,000 gallons of pool water.
Should you chlorine shock pool before closing for winter?
Should I Shock the Pool Before Closing? Absolutely. Shocking the pool with a granular oxidizer gives your pool water a good start to winter. It removes impurities and contaminants that could stain the pool or consume your winter water chemicals.
Should I add algaecide when closing pool?
Can you use shock to close a pool?
Yes, it’s possible to over-shock a pool. Pool “shock” is simply a concentrated version of chlorine, and using too much of it can result in your pool water becoming cloudy. If you over-shock your pool, avoid swimming in it until the water clears up. Remove the cover—if you have one—to speed up the process.
How much shock do you use to close a pool?
Shocking your pool is easy: Use a shock treatment to bring your 10 to 12 PPM. Then, wait a day or two for the chlorine to come down to its normal level, about 1.5 to 3.5 PPM. Pro tip: For best results, shock your pool a few days before you plan to shut it down.
