What color is a 200K resistor?
What color is a 200K resistor?
200K Ohm Resistor Color Code: Red, Black, Yellow, Golden. Resistance: 200K Ohm, Power Rating: 0.25 Watt, Approximate Maximum Current: 1.12mA .
What color resistor is 100K?
100K Ohm Resistor Color Code: Brown, Black, Yellow, Golden. Resistance: 100K Ohm, Power Rating: 0.5 Watt, Approximate Maximum Current: 2.24mA .
What color is a 300K resistor?
300K Ohm Resistor Color Code: Orange, Black, Yellow, Golden. Resistance: 300K Ohm, Power Rating: 0.25 Watt, Approximate Maximum Current: 0.91mA .
What color is a 150K resistor?
150K Ohm Resistor Color Code: Brown, Green, Yellow, Golden. Resistance: 150K Ohm, Power Rating: 0.25 Watt, Approximate Maximum Current: 1.29mA .
What is 20K ohm resistor color code?
20K Ohm Resistor Color Code: Red, Black, Orange, Golden. Resistance: 20K Ohm, Power Rating: 0.25 Watt, Approximate Maximum Current: 3.54mA .
How do I identify a 300k resistor?
A 300Ω resistor would have the color code: orange, black, brown. A 1kΩ resistor has the color code: brown, black, red. This is assuming you have carbon composition resistors.
What is the color code of 10k ohms?
The color code of the 10k ohm resistor with 5 band is brown – black – black – red – [Tolerance].
What is the color code for a 2200 5% resistor?
Explanation: Resistor colour coding series: Black 0 Brown 1 Red 2 Orange 3 Yellow 4 Green 5 Blue 6 Violet 7 Gray 8 White 9 None 20% Silver 10% Gold 5% Therefore Red, Red, Brown, Gold 2 2 101 5% = 22 x 10 = 220 ohm 5% (tolerance).
What is resistor 220 ohm?
220 ohm 1/4 watt Resistor (Pack of 10) Resistors act to reduce current flow, and, at the same time, act to lower voltage levels within circuits. In electronic circuits, resistors are used to limit current flow, to adjust signal levels, bias active elements, and terminate transmission lines among other uses.
What is resistor colour code?
So, colour bands are printed on them to represent the electrical resistance. These colour bands are known as resistor colour code. The resistor colour code was invented in the 1920s by the Radio Manufacturers Association (RMA).
What is the tolerance limit of a 200k resistor?
If you calculate a 200K resistor with a tolerance of 0.1%, the calculator will give a tolerance floor of 180K and a ceiling of 220K, which is correct for 10% tolerance, not 0.1%. The correct tolerance limits should be 199.8K – 200.2K. Like.
What is the value of the resistor with the bands yellow-violet-black-brown-grey?
Let us consider the color code for the resistor with the bands YELLOW-VIOLET-BLACK-BROWN-GREY. Yellow corresponds to the value ‘4’ in the color chart. Violet represents ‘7’ and Black represents the value ‘0’.