What engine is in a 1951 Chevy truck?

The standard engine in the 3100 series — as well as the 1500, 3600 and 3800 lines — was the carryover 216.5-cid inline six-cylinder rated at 92 hp. The 1951 Chevrolet trucks were the fifth model year in the evolution of GM’s “Advance-Design” trucks following World War II.

What Motor came in a 1950 Chevy truck?

These models came with a 6 cylinder engine, either a 216.5 cubic inch Thriftmaster engine or a 23.5 cubic inch Loadmaster designation. The base model came with the 216.5 size engine. Transmission was a 3 or 4 speed manual transmission.

What engine came in a 53 Chevy truck?

The 1953 Chevy C3100 pickup featured an inline overhead valve, six-cylinder Thriftmaster 216.5 cubic-inch engine. Its bore and stroke was 3.5 inches by 3.75 inches, with a compression ratio of 6.6:1. It generated 84 net horsepower at 3,400 rpm. Its maximum torque rating was 170 pound-feet at 1,000 to 2,000 rpm.

What engine was in a 1951 Chevy 3100?


Inline 6
Displacement : 3548 cc | 216.5 cu in. | 3.5 L.
Power : 92 HP (67.712 KW) @ 3400 RPM
Bore : 3.5 in | 89 mm.
Stroke : 3.8 in | 95 mm.

Where is the VIN number on a 1951 Chevy truck?

Serial Number Location The serial number is located on the left (driver’s side) front body hinge pillar, except on models with a cowl less windshield, where the serial plate is located on the left hand cowl side inner panel except forward control chassis serial number plates installed by the body builder.

How do you tell what year an old Chevy truck is?

The year when the truck was manufactured is usually mentioned in the car manual. Without the car manual, the VIN number is the easiest way to determine the model year of a Chevy truck. Any Chevy truck manufactured after 1972 has a VIN number.