What is an Ansul fire extinguisher?
What is an Ansul fire extinguisher?
ANSUL is a line of special hazard fire protection products designed to meet strict standards and tested under the scrutiny of independent labs and approval agencies all over the world. Tyco Fire Protection Products introduced this premium brand in 1939.
Which type of fire extinguisher is best for kitchen fires?
Class B extinguishers are rated for fires involving flammable liquids such as kitchen grease, gasoline, oil, solvents and oil-based paint.
What does the word ANSUL mean?
The name Ansul comes from ANhydrous SULfur dioxide (SO2), which was sold to die works and fruit preservers, and later as a refrigerant. Production of fire suppression chemicals began in 1934.
Which is a disadvantage of CO2 extinguishers?
Disadvantages Of Carbon Dioxide Extinguishers As CO2 works by displacing the oxygen around the fire, it is not suitable for outdoor use, or in environments exposed to windy conditions. CO2 is a high pressured extinguisher. Using it on class A fires or class F fires could cause the fire to spread.
How long will a 10 lb fire extinguisher last?
The approximate discharge time for 10 to 20 pounds of dry chemical ranges from 10 to 25 seconds.
How long will a 15 lb CO2 extinguisher last?
How long will a 15 lb CO2 extinguisher last under continuous operation? Approximately 40 seconds.
What kind of fire extinguisher is not allowed in kitchen?
Water Extinguishers This type of extinguisher is used for fires caused by various organic materials including fabrics, textiles, coal, wood, cardboard and paper among others. It should not be used for kitchen fires, fires caused by flammable gas and liquids as well as fires that involve electrical equipment.
What is an Ansul fire protection system?
The Ansul Kitchen System is a pre-engineered, automatic fire suppression system that can tackle large, hazardous fires without human intervention. It is the most widely used kitchen suppression system in the world due to its many features and mechanisms to ensure that they are the safest and most reliable solution.
How much does an Ansul fire suppression system cost?
The Ansul R-102 uses a low pH liquid agent and is designed for a variety of appliances. It also detects fires in ventilating equipment, including hoods, ducts, and grease extractors. Costs range from around $3,000 to around $5,500.
What triggers an Ansul system?
How it works – When a fire occurs in a protected area, it is quickly detected by the sensors the cooker appliance hood. The detectors trigger the Ansul Automan releasing mechanism which actuates the system – pressuring the agent storage tank and automatically shutting off the appliance energy.
Where is an ANSUL system used?
Such would include those associated with cooking and ventilating equipment like restaurant hoods, ducts, filters, and plenums, among others. Basically, the Ansul Fire Suppression system is suitable for use in airports, hospitals, nursing homes, restaurants, schools, and other related facilities.
How often should an Ansul system be serviced?
A complete inspection of your Ansul kitchen hood fire suppression system should happen regularly — at least once every six months, according to NFPA 96. To complete the inspection, you’ll need to first coordinate maintenance with a factory authorized, trained service technician.
At what temperature does an ANSUL system go off?
32 °F to 130 °F
1 The R-102 system shall be capable of operating within a temperature range of 32 °F to 130 °F (0 °C to 54 °C). 2.1.
Are ANSUL systems wet or dry?
Ansul R102 Wet Chemical Fire Suppression Systems, fire suppression system, dry chemical fire suppression.
At what temperature does an Ansul system go off?
How do I service my ANSUL system?
Here’s what to expect from your authorized service provider
- Visually inspect appliance location and layout for nozzle coverage.
- Visually inspect all surface, duct and plenum nozzles.
- Verify there are no signs the system has been activated or tampered with.
- Check pressure gauges for proper PSI.
How long does an ANSUL system last?
Your local authorized ANSUL distributor will recharge your INERGEN system and place it back into service. How much will it cost to replace the agent in the event of a discharge? Tyco will replace the INERGEN agent for up to 20 years from the date of commissioning the INERGEN fire suppression system.
What temperature does an Ansul system go off?
1 The R-102 system shall be capable of operating within a temperature range of 32 °F to 130 °F (0 °C to 54 °C). 2.1.
Is Ansul wet or dry?
ANSUL wet chemical restaurant agents are mild alkaline liquids posing limited corrosion effects to common materials such as steel and aluminum.
Does an Ansul system have to be manually activated?
The Ansul R-102 and Ansul Piranha systems can both be manually and automatically activated in the same way.
How do you clean your ANSUL?
Using hot, soapy water and either a clean cloth or sponge, wipe away all foamy residue and thoroughly scrub all surfaces that have come in contact with the fire suppressing agent. After thoroughly cleaning all affected surfaces, adequately rinse and allow them to completely dry before re-energiz- ing the equipment.
How long does an Ansul Fire system service take?
How long does an Ansul fire system service take? With an Aura Fire Safety (AFS) Specialist we will work with you to keep up regular maintenance and testing for your Ansul system. Typically a semi-annual test will take roughly 30 minutes to 1 hour depending on the size of the hood and the number of appliances. This is time well spent.
What is the best brand of fire extinguisher?
Like with smoke detectors, it’s important to buy a kitchen fire extinguisher that has an ETL or UL rating. Luckily most of the products from major home safety brands like Amerex, Kidde, and First Alert are all ETL- or UL-certified. You’ll also want to find one with an easy-to-read pressure gauge.
What is UL rating of fire extinguishers?
The numbers in the ul rating are a relative measurement of how effective a given extinguisher is at fighting certain classes of fires, based on proper fire extinguisher training. The a, b, c rating system defines the kinds of burning materials each fire extinguisher is designed to fight.
How to inspect fire extinguisher in 3 minutes?
Perform efficient paperless fire extinguisher inspections on your mobile device;
