What is the cheapest way to do a basement ceiling?

A super easy DIY option for your basement ceiling is glue-on tiles. Typically made of polystyrene or fiberboard, these tiles come in a variety of colors, sizes, and styles, and are also paintable. You’ll need to install a foundation, like plywood, to glue them to. But after that, it’s as simple as glue and stick.

What type of wood can I use on a ceiling?

Oak is the most popular quarter-sliced wood used for ceilings. Other woods available in this style are white birch, white oak, sycamore, black walnut, white maple, bamboo, vertical-grain hemlock, cherry and vertical-grain Douglas fir.

Can you use wood paneling for basement ceiling?

Painted wood planks, like beadboard panels, work well in basements with lower ceilings, because these planks keep the ceiling profile low while allowing you to add style and texture. Use a lighter color to help amplify light, or use your ceiling as your accent wall by using a color or pattern with the wood planks.

Can you use plywood basement ceiling?

We found a great product that let us make our basement ceiling idea on a budget – and a wood panelled one at that! It wasn’t that hard and it turned out really well. It sure doesn’t look like a plywood ceiling! Here’s where we met the product we didn’t know we needed: RevolutionPly plywood (less than $25 a sheet!)

Can I use wood flooring on ceiling?

Although you won’t need to worry about constructing a subfloor, wood floor ceilings still require support. Contractors can install wood flooring planks over a flat drywall ceiling in good condition. Drywall plays the role of subfloor in this case, but the ceiling joists must be located and marked.

How much does wood ceiling cost?

Wood Ceiling Cost Wood ceilings are $2 to $20 per square foot, depending on the type of wood you want to use. Expect to pay anywhere from $750 to $3,000 for each 150-square-foot room.

What is wood panel on ceiling called?

It goes by many names — planked wood, wood slats, tongue and groove, beadboard, nickel-gap boarding, shiplap, and on, and on.

What did you do before you added the wood slat ceiling?

Before I added the wood slat ceiling, my ceiling was really in sad shape. It all started when we added the recessed lighting. We didn’t remove all of the drywall because…well…something to do with the way that the ceiling joists lined up. So when we replaced the drywall that had been removed, the new drywall was slightly thinner than the old stuff.

How do you cut plywood for a slat ceiling?

So I decided that a wood slat ceiling was the answer. I purchased four sheets of 1/4″ plywood at Home Depot, and because I don’t own a table saw, I had them cut the plywood into 4″ strips for me. Then I cut those strips into 4-foot sections with my miter saw.

What is a woodworks ceiling?

WOODWORKS ceilings are an excellent alternative to custom millwork that can prove to be unreliable, drive up project costs, and result in project delays. Offered in a variety of perforations and finishes- from real wood veneers to exotic species, WOODWORKS ceilings offer many options to reflect your design intent.

How do you build a plywood ceiling?

It sure doesn’t look like a plywood ceiling! Step 1 – Strip down to the joists and make a plan. Step 2 – Put up the big sheets: begin with all of the hard cuts first. Step 3 – Measure and rip strips for the raised sections. Step 4 – Glue and Nail them up! Step 5 – Finish and trim out the plywood ceiling.