What is the command for Cisco router?

The following commands are used to gather information on a Cisco IOS Software-based router when attempting to learn basic information about a router, or possibly troubleshooting protocol-independent problems: show version. show running-config….

Task Command
Enable Cisco Discovery Protocol on an interface. cdp enable

Which command is used for router configuration mode?

Entering and exiting in different modes:

Modes Access method prompt
privilege mode use enable command in user mode router#
global configuration mode use configure terminal command router(config)#
Interface mode use interface command and specify an interface in global configuration mode router(config-if)#

What is basic router configuration?

Basic configuration of the router includes configuration of the IP address, default routing, static and dynamic routing, static and dynamic NATing, host name, banner, secret password, user accounts, and other options.

What is sh Run command?

#2: show running-configuration The running-configuration is the config that is in the router’s memory. You change this config when you make changes to the router. Keep in mind that config is not saved until you do a copy running-configuration startup-configuration. This command can be abbreviated sh run.

What are Cisco commands?

Cisco Commands Cheat Sheet

Basic Configuration Commands
Command Purpose
interface fastethernet/number Enters interface configuration mode for the specified fast ethernet interface
reload An exec mode command that reboots a Cisco switch or router
hostname name Sets a host name to the current Cisco network device

How do I configure my router IP address?

How to Change Router IP Address

  1. Enter your router’s IP address into your favorite web browser.
  2. Log in with the default username and password.
  3. Click on Setup.
  4. Choose Network Settings.
  5. Type in the router’s new IP address under Router Settings.
  6. Click on Save Setting.