What is Trespa countertop?

Trespa TLP compression-molded countertops are composed of thermoset resins with cellulose fiber reinforcement for outstanding resistance to chemicals, heat, and stains. The nonporous tops will not rot or rust and are resistant to fungus, bacteria, and are UV resistant.

What is a Trespa panel?

TRESPA Meteon® panels are a flat architectural panel, based on thermosetting resins, homogeneously reinforced with wood based fibers and manufactured under high pressure and at high temperatures. The panels have an integrated decorative surface using proprietary EBC technology.

What is Trespa top made of?

Trespa Toplab Base Its Toplab Base surfaces are made from a combination of a solid, homogeneous core and a melamine resin-based hard surface. The reinforced build means impact resistance that’s up to the task of heavy-duty use with minimal maintenance year after year.

How do you cut Trespa countertops?

Cutting Trespa® with a multi-tool or angle grinder Trespa®’s general guidelines recommend cutting these panels with a wall saw, jigsaw, fixed circular saw, or hand-held circular saw. If you’re going to use a hand-held circular saw, Trespa® recommends that you have the non-decorative side facing upwards while sawing.

What is trespa used for?

Trespa is the brand name of a type of high-pressure laminate (HPL) plate manufactured by Trespa International BV, based in Weert, the Netherlands. Their panels are used for exterior cladding, decorative facades and interior surfaces. It is composed of woodbased fibres or Kraft paper with phenolic resin applied.

Is trespa heat resistant?

Trespa Base is heat resistant. Due to the high density, Trespa Base ignites at relatively high temperature and carbonises in a way similar to (hard)wood. The panel material does not melt, drip or explode and retains its stability for a long period of time.

How thick are Trespa panels?

Trespa® is a heavy material with a specific weight that varies between 8.5 kg per m2 (sheet thickness 6 mm) till 18.2 kg per m2 (sheet thickness 13 mm).

Is Trespa a HPL?

Exterior panels for façades. Trespa® Meteon® is a decorative high-pressure compact laminate (HPL), manufactured using Trespa’s unique in-house technology, Electron Beam Curing (EBC).

How do you screw into a Trespa?

Then the Trespa® panels must be ventilated….How to fix Trespa® with screws

  1. When screwing Trespa® panels, keep one screw hole as an attachment point.
  2. You’ll find the attachment point in the middle of the panel (with an odd number of helix lines) or halfway along the longest length (with an even number of helices).

Is Trespa an HPL?

Trespa® Meteon® is a decorative high-pressure compact laminate (HPL) with an integral surface manufactured using Trespa’s unique in-house technology: Electron Beam Curing (EBC).

How long do Trespa panels last?

Trespa® Meteon® panels have a manufacturers guarantee of 10 years and a serviceable life expectancy in excess of 50 years.

Why choose Trespa?

“Innovation is the foundation of our approach.” Trespa uses state-of-the-art engineering to create cladding panels, exterior siding and scientific surface solutions that are as durable as they are appealing. Their vivid colors and evocative textures are grabbing attention all over the world.

What color is the sink in Trespa top lab plus?

Sink Color: Black, Graphite Gray, Light Gray, Forest Green, Powder Blue, Platinum Grey, Pearl gray, Sand Tan, Navy Pacific Blue or Bright White to match or contrast with adjacent work surface of Trespa Top Lab Plus solid phenolic. a. Molded Polyethylene (industry standard) Model # EF-PPSW-85

What is Trespa® Toplab® plus align?

A NEW STAR IS BORN! There is no Planet B. Trespa® TopLab® PLUS ALIGN addresses the issue of environmental care, providing the same high quality standards of Trespa® TopLab® PLUS with a strong commitment to the use of renewable materials. Click here for the technical specifications of our products.

How do I use Trespa Pura NFC® siding for machining?

• Positioning: Always position the entering tooth at the decorative side of the Trespa Pura NFC® Siding. • Cutting edges: Any sharp edges can be removed using sandpaper or a router. • Rake angle: A rake angle of 45º gives the best performance.   current information regarding Trespa’s For machining guidelines see www.trespa.info.