What lengths do BCI joists come in?

What lengths do BCI joists come in?

I-Joists are manufactured in a wide range of depths ranging from 9 ½″-24″ and can be special ordered in lengths as long as 60 feet. BCI Joists are available in standard depths up to 20″ and AJS joists are available in depths up to 24″.

What is a BCI truss?

BCI® Joists are specially constructed I-joists with flanges made from strong VERSA-LAM® laminated veneer lumber with oriented stranded board webs and approved waterproof structural adhesives, providing outstanding strength and durability. Features. Benefits.

How much does AI joist cost?

I-Joists, LVL Beams & Glue Lams

Are floor trusses stronger than joists?

Span longer distances than traditional joists, removing the need for walls in some areas. Lighter weight. Stronger than traditional joists. Wider nailing surface (making the building process easier)

How far can a BCI cantilever?

In general, BC Framer® software and BC Calc® software will not accept cantilever lengths that exceed 1/3 of the total back-span length for all joists and beams. The limit may be over-ridden but the designer will be responsible for verifying that the members with long cantilevers are properly designed and braced.

How much does a BCI joist weigh?

90.24
Helps to prevent squeaks, shrinkage and other dimensional lumber problems, and earn green points….VIEW PRODUCTS & SERVICES IN YOUR AREA.

How much does a BCI Joist weigh?

How far will a 12 inch I-joist span?

You can go up to 17 feet, 9 inches if you use 9-12 inch-deep joists that are 12 inches on-center.

Are engineered joists cheaper?

Engineered floor joists are more expensive than 2×10 lumber, but are much lighter and easier to handle. One of the reasons engineered floor joists, particularly I-beams, are so common is that they can come in lengths of up to 60 feet and can be cut to length on the job site just like regular lumber.

How far can you span floor trusses?

A floor truss can be designed to span 30 or more feet with ease. The truss manufacturer can build them so strong that there’s no bounce to the floor at all. This comes in handy if you desire a tile floor. Tile and grout can crack if installed over wood floors that are springy and bouncy.

How far apart do you put floor trusses?

Most often, floor joist spacing is 16 inches apart on center, but this can vary depending on building codes and the requirements of the structure in the blueprint. Floor joists help distribute the load of a structure.

How far from end of joist can you drill?

Holes up to 4 in. can be drilled in the middle of the I-joist, away from the ends and load-bearing wall. Keep the distance between adjacent holes at least twice the diameter of the largest hole. For holes larger than 4 in., consult the lumber supplier.

What is a BCI 6000?

Boise Cascade® BCI® 6000 Joist. SKU: BCI6000117832. BCI® Joists are specially constructed I-joists with flanges made from VERSA-LAM® laminated veneer lumber and a revolutionary flange profile which prov… Depth. 9-1/2″

What size lumber can span 24 feet?

What size beam to span 24 ft:- as per general thumb rule and guidelines, a 4 nailed 2×18 or 4-2×18 or 8×18 size of wood beam can allow to span 24 feet. Thus, for a 24 foot span, you will need atleast 4-2×18 or 8×18 size of wood beam.

What size steel beam do I need to span 12 feet?

For beam span 10 -12 foot, this general thumb rule, we will assume a structure of G+4/ 5 storey/five floor residential building, using standard 9″ thick walls, size of an RCC beam should be 12”x 18” (300mm x 450mm) in which width of beam is 12″ and beam depth is 18″, using 10 nos bar, 4 bars of 20mm Steel used at …

What size floor joist do I need for a 12 foot span?

Thus you will need a 2×6 (2-by-6) size of floor joists for 12 foot span at standard 12 inches spaced.

What is stronger LVL or I-joist?

The LVL keeps the I-joists in place and gives additional support for the floor. Like the I-joists, the LVL will not bow, crown, or split. The composition of the wood is much stronger than traditional lumber, and therefore can be relied on more.

What size header is needed for a 12 foot span?

How far can a 4×12 header span:- as per general rules and guidelines, nominal size of a 4×12 header can span upto 12 feet. Thus, 12 feet is maximum allowable span for 4×12 size header. Therefore, for a span upto 12 foot, you needed 4×12 size header. 4×12 size header is needed for a 12 foot span or opening.

Can a 2×12 span 16 feet?

A 2×12 (2-by-12) floor joists can span up to 23 feet 3 inches, 2×10 (2-by-10) up to 19 feet 1 inches, 2×8 (2-by-8) up to 15 feet & 2×6 (2-by-6) up to 11 feet 4 inches at 16″ spaced by using southern yellow pine graded as #1 when live load of 30 lbs/ft^2 & dead load of 10 lbs/ ft^2.

https://www.youtube.com/watch?v=V_2BXWQn9RY