Why is my Fisher and Paykel oven not working?

Check that the oven is connected to the power supply and the power is turned on. If it is and the oven still doesn’t work, there may be a power failure in your home or area. Models with analogue timer: the oven has not been set to manual mode.

Where is the model number on a Fisher and Paykel oven?

MODEL NUMBER SERIAL NUMBER Serial label located inside the top oven panel behind the cavity.

How do you unlock a Fisher and Paykel oven?

To lock, press and hold the select button until the control lock indicator comes on. To unlock, press and hold the cancel button until the indicator flashes and then goes out.

How do I turn off auto on Fisher and Paykel oven?

To cancel automatic cooking at any time, press the button and turn the temperature and function knobs to the off O position. When the stop time is reached, the oven will turn off, the timer will beep and AUTO will flash: Press the button to stop the beeping and return the oven to manual mode.

How do I reset my oven after a power cut?

How To Reset Your Oven After a Power Surge: 5 Steps

  1. Step 1: Check the Breaker Box.
  2. Step 2: Make Sure the Fuses Are Still Good.
  3. Step 3: Check the Power Cord.
  4. Step 4: Reset the Electronic Control Panel.
  5. Step 5: Try to Give the Oven a Cycle To Complete.
  6. The Control Panel Is Locked.
  7. You Have the Delay Start Turned On.

How do you clean a Fisher and Paykel oven?

Clean with a solution of mild detergent and hot water, then wipe dry with a microfiber cloth.

  1. Clean after every use to avoid contamination.
  2. Do not wash in the dishwasher, immerse in soapy water, use oven cleaner or leave in the oven during a Self Clean cycle (where available).

How do I read my Fisher and Paykel serial number?

  1. 87887 – A. The product code is a 5-digit.
  2. 87887 – A. The product code is a 5-digit.
  3. 87887 – A. The product code is a 5-digit.
  4. 87887 – A. The product code is a 5-digit.
  5. 87887 – A. The product code is a 5-digit.
  6. 87887 – A. The product code is a 5-digit.
  7. 87887 – A. The product code is a 5-digit.
  8. 87887 – A. The product code is a 5-digit.

How do you unlock Fisher and Paykel stove top?

To unlock the controls

  1. Make sure the cooktop is turned on.
  2. Touch and hold the keylock control. for a few seconds. The indicator light above the control goes out.
  3. You can now start using your cooktop.

How do you reset an oven after power failure?

Why is my oven not heating up after power cut?

Check the Breaker – A damaged or compromised breaker is the most common cause of performance problems. Check the breaker and reset it to see if the oven is working. If the breaker smokes or burns again, stop using the appliance and call an expert.

How do I get my oven to work again?

How do you clean a Fisher and Paykel freestanding oven?

Wipe down the cooktop and wipe out the oven after every use. Wipe up spills. Avoid leaving alkaline or acidic substances (such as lemon juice or vinegar) on the surfaces. Do not use cleaning products with a chlorine or acidic base.

How do you clean the glass on the oven door?

  1. Open the door and wipe off any loose bits of grime with a damp microfiber cloth.
  2. Pour the baking soda in the bowl.
  3. Slowly add water to the baking soda to make a paste.
  4. Spread the paste on the inside of the oven window.
  5. Let this sit for around 15 to 20 minutes.
  6. Moisten a clean microfiber cloth and wipe the paste away.

Where do I find my appliance model number?

Most refrigerators, ovens, microwaves, and dishwashers have the model number inside the door. Open your doors, and look around the door frame. Many times the appliance model number will be on a plate against the frame.