Why is the sound not working on my Blu Ray player?

This issue could be caused by the volume level of the connected TV or sound system being too low or muted. It also can occur if the audio output setting of the Blu-ray Disc player is not set properly.

Is there a reset button on a Sony Blu Ray player?

Follow these steps to perform a factory reset on your Blu-ray Disc™ player: On the supplied remote control, press the HOME button. Select Setup. Select Resetting or.

Why is my Sony surround sound not working?

You may try to changing the TV channel or play back a movie on a DVD player. Try different cables to verify this is not a bad set of cables. Try setting the Audio/Video (A/V) receiver to a different Surround Sound mode. IMPORTANT: Verify that the source you are playing is encoded with Surround Sound audio.

How do I troubleshoot my Sony Blu Ray player?

Follow the steps below to troubleshoot if the Blu-ray Disc player cannot read or play a specific disc.

  1. Make sure the disc is playable. Make sure the inserted disc is compatible with the Blu-ray Disc player .
  2. Make sure the disc is in good working condition.
  3. Make sure the settings of the Blu-ray Disc player is correct.

How do I get sound from my Blu-Ray player to my TV?

When HDMI Audio Output is set to HDMI2, check the connection of the HDMI OUT 2 jack on the Blu-ray Disc player and make sure that the connected device is turned on. To output sound from a TV, connect the TV to the HDMI OUT 1 jack of the Blu-ray Disc player and change the HDMI Audio Output setting to Auto or HDMI1.

What is PCM and bitstream audio?

The difference between PCM and Bitstream is in regards to the device utilized for decoding the compressed format to retrieve the uncompressed PCM data. If you utilize Bitstream, then the AV receiver is performing the decode. PCM is not better than Bitstream format in terms of quality.

How do I fix my surround sound not working?

Go to the Playback tab, select your 5.1 surround speakers and click on Properties. In Speaker Properties, go to the Enhancement tab and uncheck the box next to Disable all sound effects. Then, Scroll down to the menu below and check the box next to Speaker Fill. Hit Apply to save your configuration.

How do I connect my Blu-ray player to my amp?

Connect the Blu-ray Disc Player, and an AV Receiver or Home Theater System to Your TV

  1. Connect one end of the high-speed HDMI cable to the HDMI OUT on the Blu-ray Disc player.
  2. Connect the other end to the Blu-ray Disc HDMI IN on the AV receiver or home theater system.

Why is the surround sound on my Blu-ray not working?

If the surround sound of the Blu-ray home theater system doesn’t work, verify if there’s no audio from the rear speakers or if you can listen to the Dolby Digital® technology 5.1 surround sound through your TV . If the volume is very low, select the Audio DRC or BD Audio Mix on the Blu-ray Disc player to Off .

How do I change the audio settings on my Blu-ray player?

Audio settings you can select in the Blu-ray player menu. Auto: Normally select this. Outputs audio signals according to the status of the connected devices. PCM: Outputs PCM signals from the DIGITAL OUT (COAXIAL)/HDMI OUT jack. On: Outputs DSD signals from the HDMI OUT jack when playing a Super Audio CD.

Does a Blu-ray player with HDMI output sound?

There’s no sound or audio when you connect a Blu-ray Disc player to the TV with an HDMI cable. Surround: Outputs audio signals with surround effects. Select this when you connect an audio device that supports Dolby Surround (Pro Logic) or DTS Neo:6.

How do I get sound from my Blu-ray player to PCM?

Set the Audio (HDMI) or Digital Audio Output setting on the Blu-ray Disc player to PCM . This applies if you connected an amplifier to the Blu-ray Disc player and the TV with an HDMI cable. Change this setting to see if the amplifier produces any sound.