Why is the Zebra printer skipping labels?

The cause of a Zebra printer skipping labels is usually due to the printer not being fully calibrated or that your driver settings are not set properly for the label size that you are using. Calibrating ensures the correct and consistent positioning of the label in the printer, and the print on the label.

How do you calibrate a label printer?

In order to calibrate your printer, follow these 5 simple steps:

  1. Insert a new roll of labels.
  2. Hold down the feed button.
  3. Wait for seven quick flashes, and release the feed button.
  4. Re-calibration process will begin, by printing out several labels at once.

How do I fix my print labels?

Here is a checklist of solutions you can use to correct your labels: Check your printer settings….

  1. Check your printer settings.
  2. Decrease the font size or reduce the amount of text.
  3. Make sure you are using the correct labels.

Why is my label not printing?

This issue can occur for a few reasons. The printer may be loaded with an unsupported label size or type, the printer’s sensor may be dirty, or there may be a problem with the DYMO drivers. Make sure you are using a supported label size.

How do I adjust my thermal printer?

Go to: Windows Start Menu > Control Panel > Devices and Printers. Click Preferences set the Paper Size to 72 x Receipt and click OK to return to the printer properties window. Click Advanced > Printing Defaults, set the paper size to 72 x Receipt and click OK to return to the printer properties window.

Why don t My Avery labels line up?

When printing Avery 5160 or other labels or reports where the position of the items on the page is important, be sure the printout is not scaled or reduced in any way, otherwise the labels may not line up to the printed text correctly when the document comes out of the printer.

Why is my printer not printing on my sticker paper?

Please ensure you’re printing on the correct side of the paper. Insert the paper print-side down in the tray. Here’s some information that might be helpful. I would try increasing the print quality setting to Best or higher to slow the printing process down.