How do I set up Vonets VAP11G 300?

Turn off WiFi and unplug any network cables from your computer. Plug the Vonets Ethernet cable into the Ethernet port on your computer. Wait about 30 seconds for the Vonets and your computer to establish a connection. Your preferred WiFi network should appear in a list of available WiFi networks.

How do I reset Vonets VAP11G?

When you want to restore the factory default setting, please press RESET button on the product for 5 seconds, after blue light blink a few, it will reset automatically (it will take about 30 seconds).

What is a Vonets WiFi Bridge?

Vonets VAP11G WiFi Bridge allows a WiFi connection in devices that only have RJ45 network port. Its simple setup, in 2 minutes. Need feeding between 5V and 15V obtainable USB port or external power supply.

How do I reset my Vonets WiFi Bridge?

1) Users can enter VONETS device configuration interface, open the System Settings, click on “Restore the factory” to restore the factory VOENTS device. Also, you can restore the factory by pressing “reset” button about five seconds.

How do I log into Vonet?

Type 192.168. 252.254 (the most common IP for Vonets routers) in the address bar of your web browser to access the router’s web-based user interface. You should see 2 text fields where you can enter a username and a password. The default username for your Vonets router is root.

How do I bridge my Wi-Fi and Ethernet?

How to bridge WiFi with Ethernet in Windows 10?

  1. Download and install the latest drivers for your Ethernet adapter directly from the manufacturer’s web site.
  2. Open Settings, click on Network & Internet and select Change adapter options.
  3. Create a new bridge by first selecting the WiFi adapter and then the Ethernet adapter.

How do I setup a wireless bridge connection?

How to create a wireless bridge using an old router?

  1. STEP 1: Reset your old router to factory settings.
  2. STEP 2: Take note of the wireless settings, the IP and the Subnet Mask of your primary router.
  3. STEP 3: Access the old router’s interface.
  4. STEP 4: Get to the proper section and choose the Bridge Mode.