How thick is a flexitallic gasket?
How thick is a flexitallic gasket?
All CG and CGI Gaskets for these standard flanges are 0.175 in (4.5mm) thick, fitted with 0.125 in (3.2mm) thick solid metal rings, unless otherwise stated.
What is flexitallic gasket?
The Flexitallic Spiral Wound Gasket is the precision-engineered solution for flanged joints, heat exchangers, boiler handholes, manholes and other high temperature, high pressure applications—providing resistance to virtually every known corrosive and toxic element.
What is flexitallic CGI?
Description. The Style CGI is for use with flat face and raised face flanges, this gasket features increased compressive force for blow-out prevention and is specified for high pressure/temperature service or where corrosive or toxic media are present. Approval. BAM for Oxygen, TA Luft. Flange Face.
Can you reuse a flexitallic gasket?
This type of gasket consists of a grooved metal plate with a process-compatible sealer filling the groove. Under load, the material in the groove compresses and seals the process. With proper maintenance, which includes sealer reapplication, these gaskets can be reused.
Can you use flexitallic gasket on flat face flange?
Flexitallic Style CGI Spiral Wound Gaskets Style CGI spiral wound gaskets are suitable for use on flat-face and raised-face flanges, and can be specified for high-pressure/temperature service or where corrosive or toxic media are present.
Where are flexitallic gaskets made?
The predecessor to Flexitallic’s U.S. business was founded in England in the mid-19th century and made sheet materials. Flexitallic relocated to Camden, New Jersey, in 1912 to form its U.S. division, and produced the first spiral-wound industrial gasket that year.
Where are Flexitallic gaskets made?
Can you use a Flexitallic gasket on a flat face flange?
How do you store flexitallic gaskets?
1) Store in a cool, dry area 2) Do not fold or bend. 3) If exposed to greases, oils, or solvents in liquid or vapor form, clean before installing. 4) Following extended storage, carefully inspect the material for damage. 5) Store horizontal to avoid tensions and warping (especially spiral wound gaskets).
What does CG stand for in gaskets?
centers gasket on flange face, provides. additional radial strength to prevent gasket. blow-out and acts as a compression stop. A general purpose gasket suitable for use. with flat face and raised face flanges up to.
Who owns Flexitallic gaskets?
Turner & Newall
Lawsuits stemming from exposure to these products caused its parent company, Turner & Newall, to file for bankruptcy. A trust fund was established with $635 million to handle future asbestos claims.
Can RF flange connect to FF flange?
1 prohibit connecting FF flanges to RF flanges. Although it does not directly address FF cast brass flanges used with raised face flanges, the intent of the specification is to prevent the cracking of the more brittle flange.